Raptor Workholding Products
We are a licensed distributor of Raptor Workholding products. Our prices are set under-list so you reap the benefits of the products and are rewarded for doing business with us.
Raptor workholding products are made by manufacturers, for manufacturers. They understand that all applications are not the same and come in various shapes and sizes. With raptor workholdings, each product can work independently or together to accommodate any job at hand. Whether you're using vises, pinch blocks, or air manifolds, they are proven to give decreased set-up time with higher-yielding production and shorter cycle times.
The fixtures feature a single-sided solid dovetail interface which gives you a solid stop when tightening the spring-loaded stainless steel dovetail clamps on the opposite side. An extruded locating screw provides an additional locating feature to help you place your workpiece in the exact spot for repeat jobs. This also helps to prevent someone from loading the workpiece in, backward.
These positioning and clamping features require a shallow dovetail “strip” which has to be machined on the clamping side of the workpiece before production machining starts. The strip width should be made out to fit the width of the dovetail fixture slot and height set to 1/8 inch. This strip, even though it is just a little stock, provides enough clamping power to hold your workpiece in all 5-axis.
The dovetail strip is easily machined with a standard 60-degree dovetail cutter which can also be purchased through RWP. To keep the sliding, a slot must be milled into the strip. Many of these features are standardized, so a programmer will be able to duplicate these processes quickly and easily. This also helps to cut down on setup time.
Machine operators have an easy time loading and unloading the materials because it’s made for simple setups. Just load the strip into the slot and have the pin slip into the designated milled slot. Clamp jaws are then tightened to stop side-to-side movement and can secure large workpieces even during heavy cuts.
THE FAST AND FLEXIBLE SOLUTION TO WORKHOLDING
Raptor 5-axis dovetail fixtures give you access to five full sides, or axis, to speed up your manufacturing process. This allows your operator to do one single program to complete a big job. It is all made for quick access while offering enough strength to keep your part from shifting.
Raptor gets out of your way so you can get the job done.
Raptor RWP-1027 Soft Jaw Aluminum Insert (right) for RWP-502 Raptor vise
SKU: RPT-RWP-1027
MPN: RWP-1027
Raptor RWP-1027-ST Soft Jaw Steel Insert (right) for RWP-502 Raptor vise
SKU: RPT-RWP-1027-ST
MPN: RWP-1027-ST
Raptor RWP-1028 Soft Jaw Aluminum Insert (left) for RWP-502 Raptor vise
SKU: RPT-RWP-1028
MPN: RWP-1028
Raptor RWP-1028-ST Soft Jaw Steel Insert (left) for RWP-502 Raptor vise
SKU: RPT-RWP-1028-ST
MPN: RWP-1028-ST
Raptor RWP-1050 Serrated Dovetail Insert for Raptor vise
SKU: RPT-RWP-1050
MPN: RWP-1050
Raptor RWP-1051 Standard Parallel Set Insert for RWP-502 vise
SKU: RPT-RWP-1051
MPN: RWP-1051
Raptor RWP-1052 Thin Parallel Set Insert for RWP-502 vise
SKU: RPT-RWP-1052
MPN: RWP-1052
Raptor RWP-1056 Straight Dovetail Insert for Raptor vise
SKU: RPT-RWP-1056
MPN: RWP-1056
Raptor RWP-1527 Soft Jaw Aluminum Insert (right) for RWP-505 Raptor vise
SKU: RPT-RWP-1527
MPN: RWP-1527
Raptor RWP-1528 Soft Jaw Aluminum Insert (left) for RWP-505 Raptor vise
SKU: RPT-RWP-1528
MPN: RWP-1528
Raptor RWP-1550 Serrated Dovetail Insert for Raptor RWP-505 vise
SKU: RPT-RWP-1550
MPN: RWP-1550
Raptor RWP-1551 Standard Parallel Set Insert for RWP-505 vise
SKU: RPT-RWP-1551
MPN: RWP-1551
Raptor RWP-1556 Straight Dovetail Insert for RWP-505 vise
SKU: RPT-RWP-1556
MPN: RWP-1556
Raptor RWP-209-V100 Aluminum Emergency Adapter for RWP-502 Vise9.9" Diameter, 1.500" Height
SKU: RPT-RWP-209-V100
MPN: RWP-209-V100
Raptor RWP-222-V100 Aluminum Universal Adapter for RWP-502 Vise 9.875" Diameter, 2.00" Height
SKU: RPT-RWP-222-V100
MPN: RWP-222-V100
Raptor RWP-223-V100 Aluminum Universal Adapter for RWP-502 Vise 11.900" Diameter, 2.00" Height
SKU: RPT-RWP-223-V100
MPN: RWP-223-V100
Raptor RWP-242-V100 Aluminum Riser Plate for RWP-502 Vise 8.450" Diameter, 1.75" Height
SKU: RPT-RWP-242-V100
MPN: RWP-242-V100
Raptor RWP-244-V100 2.25" Dovetail 100mm Vise Plate Connector for RWP-502 Vise
SKU: RPT-RWP-244-V100
MPN: RWP-244-V100
Raptor RWP-251-V100 Aluminum Riser Plate for RWP-502 Vise
SKU: RPT-RWP-251-V100
MPN: RWP-251-V100
Raptor RWP-33020 Mitee-Bite End Stop Insert for Raptor vise
SKU: RPT-RWP-33020
MPN: RWP-33020
Raptor RWP-33050 Mitee-Bite TalonGrip™ Insert for Raptor vise
SKU: RPT-RWP-33050
MPN: RWP-33050
Raptor RWP-502 Steel 100mm Self Center Vise
SKU: RPT-RWP-502
MPN: RWP-502
Raptor RWP-505 Steel 150mm Self Center Vise
SKU: RPT-RWP-505
MPN: RWP-505