NAAMS End Effector Components
End effectors the end contact points for robotics in automation. The NAAMS end effector components are standardized parts that help to cut design and setup costs. Using standard parts will increase the efficiency of your processes by eliminating the need for custom fixtures. All components are made from ASTM A-36 steel plating or ASTM A-500 Grade B steel tubing.
For the full pdf catalog of our end effector components, click on the link below.
NAAMS End Effector Components
All Tolerances | ||
---|---|---|
0.0 | Machining | ± 0.3 |
Fabrication | ± 1.5 | |
0.00 | Between Machined Surfaces | ± 0.08 |
Between Dowels in Same Plane | ± 0.03 | |
To Screw Holes, Non-Accumulative | ± 0.13 |
NAAMS Standards End Effector Components | |||
---|---|---|---|
NAAMS Code | Tube Size | Bolt Circle | |
A (Inch) | B (Metric) | ||
AE01 | 1-1/2 x 1-1/2 x 3/16 WT | 40 x 40 x 4 WT | 125mm |
AE02 | 2 x 2 x 3/16 WT | 50 x 50 x 4 WT | 125mm |
AE03 | 3 x 2 x 3/16 WT | 75 x 50 x 4 WT | 125mm |
AE04 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | 125mm |
AE05 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | 125mm |
AE06 | 1-1/2 x 1-1/2 x 3/16 WT | 40 x 40 x 4 WT | 160mm |
AE07 | 2 x 2 x 3/16 WT | 50 x 50 x 4 WT | 160mm |
AE08 | 3 x 2 x 3/16 WT | 75 x 50 x 4 WT | 160mm |
AE09 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | 160mm |
AE10 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | 160mm |
AE11 | 1-1/2 x 1-1/2 x 3/16 WT | 40 x 40 x 4 WT | 200mm |
AE12 | 2 x 2 x 3/16 WT | 50 x 50 x 4 WT | 200mm |
AE13 | 3 x 2 x 3/16 WT | 75 x 50 x 4 WT | 200mm |
AE14 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | 200mm |
AE15 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | 200mm |
AE21 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | |
AE22 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | |
AE23 | 3 x 3 x 3/16 WT | 75 x 75 x 4 WT | |
AE24 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | |
AE25 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | |
AE26 | 4 x 4 x 3/16 WT | 100 x 100 x 4 WT | |
AE27 | 6 x 6 x 1/4 WT | 160 x 160 x 6 WT | |
AE28 | 6 x 6 x 1/4 WT | 160 x 160 x 6 WT | |
AE29 | 6 x 6 x 1/4 WT | 160 x 160 x 6 WT |