Brand: HALDER
SUPPORTING ELEMENTS - 23220.0400
SKU: EH-23220.0400
MPN:
*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
*Please note, there is a $50 minimum for all Halder product orders*
Short Description
Supporting Elements | 23220.0400Halder 23220.0400 Data Sheet
*Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*
Full Description
The support element is used to support additional clamping points on components.
The benefits of the support element are:
- provides additional support without distortion
- helps to eliminate tool vibration
- supports ribs, beads and shackles to reinforce clamped components
- distortion-free support of raw parts
Material
Housing
- Aluminium, red anodised
Body
- Case hardened steel, nitrided, manganese phosphate treated and ground
Assembly
Fix the support element (2 x Má6 thread) onto the device. Pay attention to the operator's side!
Alternative: Dismantle the Má12áxá10 threaded pin and replace it by an Má12áxá30 threaded pin and assemble the support element with a wrench (WSá21), e.g. for T-slot mounting (no defined operator's side ensured). Threaded pin Má12áxá30 and T-nut DINá508 Má12 x 14, quality 10, are part of the standard supply volume.
Lowering of the support element by 16ámm is possible.
Operation
By turning the clamping cam (WS 6 internal hexagon) on the outer surface of the red protective sleeve, the support pin contacts the workpiece with a slight spring load.
- By turning on (15 Nm) as far as possible (lock), total of 180–‘, the clamping mechanism locks the support pin without moving. The support element has been placed onto the workpiece and locked.
- If turned in the opposite direction (unlock), the clamping is released. If turned back as far as possible, i.e. total of 180–‘ the support pin moves to the end position.
Notes
For safe functioning, the thread bore M 12 must always be closed.
References
Additional flexible possibility of fitting with holding plate 23210.0740.
The M 8 threaded pin on the support bolt can be replaced by various locating and seating pins (EH 22...). Customer-made extensions can also be fitted.
We Also Recommend
Adapter for Taper Clamping Unit - 23250.0530
SKU: EH-23250.0530
MPN: 23250.053
Adapter for Taper Clamping Unit - 23250.0531
SKU: EH-23250.0531
MPN: 23250.0531
Adjustable Clamping Lever - 24400.0022
SKU: EH-24400.0022
MPN: 24400.0022
Adjustable Clamping Lever - 24420.1010
SKU: EH-24420.1010
MPN: 24420.101
Adjustable Clamping Lever - 24420.1012
SKU: EH-24420.1012
MPN: 24420.1012