Brand: INDUSTRIAL MAGNETICS
Industrial Magnetics MAG-MATE ® Versalift 1200 Lb With Lug Added VL1200LUG
SKU: IM-VL1200LUG
MPN:
*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
Short Description
Industrial Magnetics MAG-MATE® Versalift 1200 Lb With Lug Added VL1200LUG. VersaLift Magnets. Compact and powerful Rare Earth lift magnet for use on flat or round surfaces. Contains an internal ON/OFF release device that does not contact or damage the surface of the part. More features than other lifts and manufactured in the USA (USA M.A.D.E.).*Industrial Magnetics orders must meet a minimum of $75*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
Full Description
Industrial Magnetics MAG-MATE® Versalift 1200 Lb With Lug Added VL1200LUG
VersaLift Lifting Magnets with Test Mode, Horizontal & Vertical Lifting Capability and RFID Chip
Compact and powerful Rare Earth permanent lift magnet for use on flat or round surfaces. Contains an internal On/Off release device that does not contact or damage the surface of the part. Locking On/Off handle prevents the handle from being bumped "On" or "Off", combined with a permanent magnetic lift, eliminates the fear of dropping the load. More features than other lifts and manufactured in the USA (USA M.A.D.E.).
- Rare Earth Permanent Magnet
- Vertical Lift Capable using the optional Lift Lug attachment
- Embedded RFID Chip
- Locking On/Off handle & Test load feature
- Supports custom pole shoes (4, 1/4"-20 Tapped Holes, 1/2 inch deep)
- Lifts flat or round loads (see chart below)
- Stationary Lift Lug(s)
- Heat resistant up to 180°F (82°C)
- 3:1 Design Factor
- ASME B30.20 BTH-1 Design Category B Service Class 3
Test Load Feature
To operate Test Feature, pull spring loaded handle out and rotate it to the "TEST" position. Lift load approximately 2-3 inches to verify the magnet has the capacity to lift your load. Once verified, place load back down and turn the handle to the "ON" position. Never complete entire lift operation in "TEST" position.
Literature Download: VersaLift Magnets| Rare Earth VersaLift Magnets | |||||||||||||||
| WLL | Overall | Magnet | Handle | Bail | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Part No. | LBS | Height (in) | Length (in) | Height (in) | Width (in) | Length (in) | Weight (lbs) | Length (in) | Thickness (in) | Height (in) | Width (in) | ||||
| VL0600 | 600 | 6-1/2 | 7 | 3-3/4 | 5 | 5-5/8 | 20 | 6 | 3/4 | 2-1/4 | 1-3/4 | ||||
| VL1200 | 1200 | 6-1/2 | 11 | 3-3/4 | 5 | 10 | 37 | 6 | 3/4 | 2-1/4 | 1-3/4 | ||||
| VertsaLift Accessories & Bundle Packages | ||||||||||||||||||
| Part No. | Description | Length (in) | Weight (lbs) | VL0600 and VLLUG1 Bundle | VL1200 and VLLUG1 Bundle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VLLUG1 | Lift Lug adapter for VL0600 and VL1200 | 4-5/16 | 3 | VL0600LUG | VL1200LUG | |||||||||||||
| Working Load Limit (WLL) in lbs & *Maximum Sheet Length Due To Sag For Material Thickness For Single Magnet Use | |||||||
| Model No. | 1/4" (6' Lg) | 3/8" (8' Lg) | 1/2" (8' Lg) | 3/4" (8' Lg) | 1" (10' Lg) | 2" (10' Lg) | 3" (10' Lg) |
|---|---|---|---|---|---|---|---|
| VL0600 | 260 | 435 | 525 | 550 | 600 | 600 | 600 |
| VL1200 | NA | 755 | 960 | 1165 | 1200 | 1200 | 1200 |
| Working Load Limit (WLL) Values for the VersaLift Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round WLL Values are based on ideal conditions. Consult the factory before specifying these magnets for use on round materials. *Max. sheet lengths are selected due to sag characteristics of specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory, NA = Not Applicable (Magnets will not turn "ON" with stated thicknesses.) | |||||||
| Round Lifting Applications | Vertical Lift (Flat Only) | ||||
| Model No. | Max. WLL (lbs) | Max. WLL at Min. Dia. / Th. | Min. Diameter / Thickness | WLL (lbs) | Min. Thickness |
|---|---|---|---|---|---|
| VL0600 | 300 | 130 | 2.00 In. / 0.12 In. | 150 | 1.00 In. |
| VL1200 | 600 | 600 | 4.00 In. / 0.50 In. | 300 | 1.00 In. |
| VersaLift Spare Parts | ||
| Type | VL0600 | VL1200 |
|---|---|---|
| Caution Sticker | 900237 | 900239 |
| Capacity Sticker | 900238 | 900240 |
| End Plate Sticker | 900253 | |
| End Plate Sticker Handle side | 900252 | |
| End Plate | MC0887 | |
| End Plate Handle Side | MC0888 | |
Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.
We Also Recommend
Industrial Magnetics MAG-MATE ® Automatic Lifting Magnet LI-120ALM
SKU: IM-LI-120ALM
MPN: LI-120ALM
Industrial Magnetics MAG-MATE ® BasicLift™ Lift Magnet 1000 lb lift Capacity, 2:1 Design Factor BL1000
SKU: IM-BL1000
MPN: BL1000
Industrial Magnetics MAG-MATE ® BasicLift™ Lift Magnet 1500 lb lift Capacity, 2:1 Design Factor BL1500
SKU: IM-BL1500
MPN: BL1500
Industrial Magnetics MAG-MATE ® BasicLift™ Lift Magnet 400 lb lift Capacity, 2:1 Design Factor BL0400
SKU: IM-BL0400
MPN: BL0400
Industrial Magnetics MAG-MATE ® Creative Lift ® Lift Magnet 1000 lb lift Capacity, 3:1 Design Factor CL1000
SKU: IM-CL1000
MPN: CL1000