Industrial Magnetics MAG-MATE ® Versalift 600 Lb With Lug Added VL0600LUG

Brand: INDUSTRIAL MAGNETICS

Industrial Magnetics MAG-MATE ® Versalift 600 Lb With Lug Added VL0600LUG

SKU: IM-VL0600LUG
MPN: VL0600LUG

  • $1,912.24
    Unit price per 
Shipping calculated at checkout.

Only 0 left!

*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**


Short Description

Industrial Magnetics MAG-MATE® Versalift 600 Lb With Lug Added VL0600LUG. VersaLift Magnets. Compact and powerful Rare Earth lift magnet for use on flat or round surfaces. Contains an internal ON/OFF release device that does not contact or damage the surface of the part. More features than other lifts and manufactured in the USA (USA M.A.D.E.).

*Industrial Magnetics orders must meet a minimum of $75*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**

Full Description

Industrial Magnetics MAG-MATE® Versalift 600 Lb With Lug Added VL0600LUG

VersaLift Lifting Magnets with Test Mode, Horizontal & Vertical Lifting Capability and RFID Chip

Compact and powerful Rare Earth permanent lift magnet for use on flat or round surfaces. Contains an internal On/Off release device that does not contact or damage the surface of the part. Locking On/Off handle prevents the handle from being bumped "On" or "Off", combined with a permanent magnetic lift, eliminates the fear of dropping the load. More features than other lifts and manufactured in the USA (USA M.A.D.E.).

  • Rare Earth Permanent Magnet
  • Vertical Lift Capable using the optional Lift Lug attachment
  • Embedded RFID Chip
  • Locking On/Off handle & Test load feature
  • Supports custom pole shoes (4, 1/4"-20 Tapped Holes, 1/2 inch deep)
  • Lifts flat or round loads (see chart below)
  • Stationary Lift Lug(s)
  • Heat resistant up to 180°F (82°C)
  • 3:1 Design Factor
  • ASME B30.20 BTH-1 Design Category B Service Class 3

Test Load Feature

To operate Test Feature, pull spring loaded handle out and rotate it to the "TEST" position. Lift load approximately 2-3 inches to verify the magnet has the capacity to lift your load. Once verified, place load back down and turn the handle to the "ON" position. Never complete entire lift operation in "TEST" position.

Literature Download: VersaLift Magnets
Rare Earth VersaLift Magnets
WLL Overall Magnet Handle Bail
Part No. LBS Height (in) Length (in) Height (in) Width (in) Length (in) Weight (lbs) Length (in) Thickness (in) Height (in) Width (in)
VL0600 600 6-1/2 7 3-3/4 5 5-5/8 20 6 3/4 2-1/4 1-3/4
VL1200 1200 6-1/2 11 3-3/4 5 10 37 6 3/4 2-1/4 1-3/4
VertsaLift Accessories & Bundle Packages
Part No. Description Length (in) Weight (lbs) VL0600 and VLLUG1 Bundle VL1200 and VLLUG1 Bundle
VLLUG1 Lift Lug adapter for VL0600 and VL1200 4-5/16 3 VL0600LUG VL1200LUG
Working Load Limit (WLL) in lbs & *Maximum Sheet Length Due To Sag For Material Thickness For Single Magnet Use
Model No. 1/4" (6' Lg) 3/8" (8' Lg) 1/2" (8' Lg) 3/4" (8' Lg) 1" (10' Lg) 2" (10' Lg) 3" (10' Lg)
VL0600 260 435 525 550 600 600 600
VL1200 NA 755 960 1165 1200 1200 1200
Working Load Limit (WLL) Values for the VersaLift Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8', use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round WLL Values are based on ideal conditions. Consult the factory before specifying these magnets for use on round materials. *Max. sheet lengths are selected due to sag characteristics of specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory, NA = Not Applicable (Magnets will not turn "ON" with stated thicknesses.)
Round Lifting Applications Vertical Lift (Flat Only)
Model No. Max. WLL (lbs) Max. WLL at Min. Dia. / Th. Min. Diameter / Thickness WLL (lbs) Min. Thickness
VL0600 300 130 2.00 In. / 0.12 In. 150 1.00 In.
VL1200 600 600 4.00 In. / 0.50 In. 300 1.00 In.
VersaLift Spare Parts
Type VL0600 VL1200
Caution Sticker 900237 900239
Capacity Sticker 900238 900240
End Plate Sticker 900253
End Plate Sticker Handle side 900252
End Plate MC0887
End Plate Handle Side MC0888

Note: Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on material that does not flex or bend. The surface of the lift, and the load being lifted, need to be clean and free of chips, oil, slag, dirt, etc. Lifting magnets must be centered on load. Not recommended for painted or finish coated surfaces.