Brand: HALDER
Sling Swivel Port - 22330.0315
SKU: EH-22330.0315
MPN:
*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
*Please note, there is a $50 minimum for all Halder product orders*
Short Description
Sling Swivel Ports for sling swivels 22330.0315.EH 22330
The locating bushings are the counterpart to the sling swivels.
The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood (picture 1 and picture 3) and one version that can be mounted into plastic,. Both bushings in picture 1 and picture 2 allow an interlock of 4x90°. The bushing in picture 3 enables a 360° rotation in the locked state. There is an uncoated variant available in addition to the black standard version.
Log on to www.push-and-go.eu for such additional products such as SLIM sling swivel, SLIM bushings and clamp collars (for shotguns). You can also place orders directly with PUSH & GO.
Halder 22330.0315 Data Sheet
*Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*
Full Description
The locating bushings are the counterpart to the sling swivels.
The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood (picture 1 and picture 3) and one version that can be mounted into plastic (picture 2). Both bushings in picture 1 and picture 2 allow an interlock of 4x90°. The bushing in picture 3 enables a 360° rotation in the locked state. There is an uncoated variant available in addition to the black standard version.
Log on to www.push-and-go.eu for such additional products such as SLIM sling swivel, SLIM bushings and clamp collars (for shotguns). You can also place orders directly with PUSH & GO.
Material
- Stainless steel 1.4305
Assembly
Mounting into wood (picture 1 und picture 3)
- Insert location hole and pilot hole for safety bolt according to specifications
- Optionally recommended is the use of adhesive for securing
- Press in bushing
- Secure bushing with a screw
Note: The bore diameter (D2) for the pilot hole of the safety bolt depends on the screw used.
Mounting into plastic (picture 2)
- Insert location hole according specifications
- Optionally recommended is the use of adhesive for securing
- Screw in bushing
Note:The bore diameter to be chosen for the location hole depends on the hardness of the plastic.
Characteristic
At l1 = 1,5: marking line