Brand: HALDER
Floating Clamp - 23320.0014
SKU: EH-23320.0014
MPN:
*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
*Please note, there is a $50 minimum for all Halder product orders*
Short Description
Floating Clamps separate clamping and locking M 12 23320.0014.EH 23320
Floating clamps with separate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.
The benefits of the floating clamp are:
avoids vibration during the processing
clamps ribs, beads and shackles to reinforce clamped components
distortion-free clamping of raw parts.
Halder 23320.0014 Data Sheet
*Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*
Full Description
Floating clamps with separate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.
The benefits of the floating clamp are:
- avoids vibration during the processing
- clamps ribs, beads and shackles to reinforce clamped components
- distortion-free clamping of raw parts.
Material
Adjustable body
- Aluminium, blue anodised
Body
- Case hardened steel, nitrided, manganese phosphate treated and ground
Clamping Jaws
- Case hardened steel, nitrided, manganese phosphate treated
Assembly
- Mount the floating clamp (M 12 connection thread) onto the device with a wrench (WS 46).
- Adjust the height limit stop and the rotating area with the blue sleeve and clamp with a set screw (3 x WS 2.5). When setting the height limit, consider tolerance of workpiece.
Operation
- Push the floating clamp downward.
- Pivot the clamping jaws in.
- Release floating clamp. The bottom jaw contacts the workpiece with a low spring force.
- Tighten the fixture nut (WS 18) having a maximum torque of 15 Nm. The workpiece is clamped; the clamp is still floating.
- Thereafter tighten the hexagon collar nut (WS 10 - max. torque 10 Nm).
- The clamping process is finished.
- Releasing is done in reverse order: release hexagon collar nut (WS 10) - release fixture nut (WS 18) - pivot the clamping jaws out.
- Floating clamp is in end position.
Notes
The thread bore must always be closed for safe functioning, e.g. set screw M 12 x 10.
For specific clamping situations, the standard clamping jaws supplied can be exchanged or replaced (see catalogue drawing: screw ISO4762-M8-12.9, Mmax.=43Nm).
References
Additional flexible possibility of fitting with holder 23470.0250 or holding plate for down-hold clamps 23210.0740.
Accessories
As an accessory, we offer clamping jaws with an increased clamping range, refer to 23320.0050-.0058, as well as pivot jaws, refer to 23320.0148-.0156.
We Also Recommend
Adapter for Taper Clamping Unit - 23250.0530
SKU: EH-23250.0530
MPN: 23250.053
Adapter for Taper Clamping Unit - 23250.0531
SKU: EH-23250.0531
MPN: 23250.0531
Adjustable Clamping Lever - 24400.0022
SKU: EH-24400.0022
MPN: 24400.0022
Adjustable Clamping Lever - 24420.1010
SKU: EH-24420.1010
MPN: 24420.101
Adjustable Clamping Lever - 24420.1012
SKU: EH-24420.1012
MPN: 24420.1012