Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Tiny Vise Double Edge Clamps

    Tiny Vise® Double Edge Clamps (Serrated Jaws, Smooth Jaws)

    Clamps & Accessories

    Tiny Vise® Double Edge Clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps securely grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large.

    The double edge clamp shown here has serrated faces (for maximum gripping) but is also available with smooth faces (to avoid marring finished parts). These clamps can be set up to apply force either at a downward angle or straight horizontally. Available in four sizes, from 5/16-18 up to a powerful 1"-8 thread size with 4000 lbs clamping force (M8 to M24 in metric). Patent number 5.624.106. Made in the USA.

    Clamping Action

    Clamping force is applied by positive screw action with the easy turn of a hex wrench (not with an unreliable, unsafe eccentric cam as used in other designs). A high-strength cap screw and thrust washer engage a mating countersink to exert strong clamping force. Much more durable than other designs.

    Force Equalization

    Only Tiny Vise Double Edge Clamps compensate for size variation when clamping two workpieces. Thrust washers have ID clearance to enable them to float horizontally, allowing both clamping jaws to contact their part simultaneously. This ensures that both parts are securely clamped with equal force.

    Optional Downthrust Force

    Clamps can be set up to apply force either at a downward angle or straight horizontally. All clamps are supplied with an optional bottom thrust washer. Installing this washer under the clamp will raise the clamp slightly and provide downthrust force during clamping. If no downthrust force is required, install the clamp without the bottom thrust washer. Doing so will improve clamping speed because fewer screw turns are required.
    Setup for Downthrust Force (with Bottom Thrust Washer)
    Setup for Horizontal Force (without Bottom Thrust Washer)

    Design Considerations

    Tiny Vise clamps are designed to provide strong clamping force when tightened by hand. Do not exceed the recommended tightening torque. Recommended torque and clamping force are at 1/3 of yield strength,
    leaving 2/3 of holding capacity to resist external cutting forces.

    Double edge clamps should always be used to hold two workpieces, not just one; otherwise recommended torque and clamping force will be significantly reduced.

    Material

    Body > 1018 steel, carburized-hardened, black oxide finish. Thrust washer > 1144 steel, heat treated, black oxide finish. Flat-Head Socket Screw > Steel, black oxide finish. DFARS and RoHS compliant.

    View as Grid List
    Sort by
    Display per page

    TINY VISE DOUBLE EDGE CLAMP CL-100-TV

    SKU: CL-100-TV
    MPN: CL-100-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-105-TV

    SKU: CL-105-TV
    MPN: CL-105-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-160-TV

    SKU: CL-160-TV
    MPN: CL-160-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-165-TV

    SKU: CL-165-TV
    MPN: CL-165-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-50-TV

    SKU: CL-50-TV
    MPN: CL-50-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-55-TV

    SKU: CL-55-TV
    MPN: CL-55-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-60-TV

    SKU: CL-60-TV
    MPN: CL-60-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-65-TV

    SKU: CL-65-TV
    MPN: CL-65-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    TINY VISE DOUBLE EDGE CLAMP CL-80-TV

    SKU: CL-80-TV
    MPN: CL-80-TV
    Email Sales for Pricing
    Double edge clamps allow clamping two workpieces at the same time with equal force. These mini edge clamps grip the side of a workpiece to keep the top clear for machining. Patented design provides strong, reliable clamping force with the easy turn of a hex wrench. These compact clamps are ideal for fixturing multiple parts, small or large. Available with serrated jaws (for maximum gripping) or smooth jaws (to avoid marring finished parts). These clamps look so simple, but work amazingly well, with major advantages over earlier designs. Patent number 5.624.108. Please click on Video above for a brief demonstration. Made in USA.

    Tiny Vise Double Edge Clamps