Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Threaded-Body Cylinders – Mini

    Threaded-Body Cylinders – Mini

    Power Workholding

    7250 psi max
    Single Acting
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted.

    Threaded-Body Cylinders – Mini, B1.458

    7250 psi max
    Single Acting
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    Available in one body diameter, with 1/2-20 (inch) or M12x1.5 (metric) threads, with a choice of two lengths for 5mm or 10mm stroke. Optional extended piston rod provides extra reach. Clamping force at 7250 psi: 560 Lbs

    Material

    Plunger > Steel, case hardened. Body > Steel, black oxide finish. Sealing Washer > Delrin.

    Threaded-Body Cylinders – Mini, Tube Mounted, B1.459

    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. The version shown here is designed for direct connection to tubing with standard compression fittings. Available in one body diameter, with M16x1.5 threads and 10mm stroke. Optional extended piston rod provides extra reach. Clamping force at 7250 psi: 560 Lbs

    Clamping Action

    Applying fluid pressure advances the plunger. Spring return.

    Design Considerations

    Threaded-Body Push Clamps have a positive stroke stop in extended position, but not in retracted position. Do place a load on the plunger while retracted.

    Mounting & Fluid Supply

    Several possible mounting methods: 1) install clamp directly into a flat-bottom tapped hole in the fixture – see drawings for hole-preparation instructions; 2) install clamp into a Mounting Block; 3) install clamp into a Feeder Cap and mount through a fixture wall (secure with a Jam Nut); 4) install in a plain tapped hole and secure with a Sealing Nut – see drawings for hole-preparation instructions. In the first three cases, hydraulic sealing is accomplished by a Sealing Washer (furnished) placed directly underneath the clamp. Tighten clamp to recommended seating torque. Fluid passages must be drilled as shown in the drawings. Do not use NPT fittings.

    Material

    Plunger > Steel, case hardened. Body > Steel, black oxide finish.

    View as Grid List
    Sort by
    Display per page

    CL-CLR-108-TBA

    SKU: CL-CLR-108-TBA
    MPN: CLR-108-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    CL-CLR-3000-183-SW

    SKU: CL-CLR-3000-183-SW
    MPN: CLR-3000-183-SW
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    CL-CLR-408-TBA

    SKU: CL-CLR-408-TBA
    MPN: CLR-408-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    CL-CLR-508-TBA

    SKU: CL-CLR-508-TBA
    MPN: CLR-508-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    CONNECTING HOUSING FOR (1458-XXX), WRENCH SIZE 19 x 28 mm CL-CLR-3467-064-TBA

    SKU: CL-CLR-3467-064-TBA
    MPN: CLR-3467-064-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    HEX NUT, M12 x 1.5 mm; FLAT CL-CLR-3300-408-TBA

    SKU: CL-CLR-3300-408-TBA
    MPN: CLR-3300-408-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    SEAL LOCK COLLAR NUT, (1458-XXX), M12 x 1.5 mm CL-CLR-3300-406-TBA

    SKU: CL-CLR-3300-406-TBA
    MPN: CLR-3300-406-TBA
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    SEALING RING, 10 x 6 x 1.5 mm CL-CLR-3000-036-SW

    SKU: CL-CLR-3000-036-SW
    MPN: CLR-3000-036-SW
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Product Number CL-CLR-3000-036-SW. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    THREADED-BODY CYLINDER, S.A., 8 x 10 mm STROKE, 500 bar CL-CLR-1458-002-TB

    SKU: CL-CLR-1458-002-TB
    MPN: CLR-1458-002-TB
    Email Sales for Pricing
    Tiny push clamps with a solid plunger. Part Number: CLR-1458-002-TB. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60" minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.

    Threaded-Body Cylinders – Mini