Taper clamping units are particularly suitable for horizontal and vertical multiple clampings. The taper clamps are compact in build and therefore enable clamping without geometric interference.
Tool steel, hardened, bright
Heat-treated steel, tempered, quality 12.9
Spring steel wire
Tool steel, hardened, blackened, and ground
Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.
Inserting the socket head screw moves the two clamping chucks outwards and presses the workpieces against a stop. Using the double taper, an additional vertical clamping force will be achieved. Stroke of taper clamping units with M 5 = ±0,5, M 8 = ±0,5, M 12 = ±1 and M 16 = ±1,5. Can be mounted in a threaded hole or with T-nuts for horizontal or vertical multiple clamping.
For further taper clamping units, refer to the section "Multiple Clamping Systems"