Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Slotted Locator Template Bushings

    Slotted Locator Template Bushings

    Alignment Pins

    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Slotted Locator Bushings can be used with many types of alignment pins and locating pins to align two holes without binding. A precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse. Available for pin diameters from 3/16 to 3/4". Made in the USA.

    Application Instructions

    carr lane slotted locator template bushings

    Slotted Locator Template Bushing shown installed with Retainer Ring

    Installation

    Drill hole in jig plate to nominal bushing OD (B diameter). Countersink 90° to allow the bushing to seat flush to .015" below the surface of a plate. Install and tighten Retainer Ring to secure. To make Retainer Ring installation easier, we offer a handy Socket-Type Installation Tool that fits a 1/4" square drive (see table below).

    Material

    Carr Lane slotted locator template bushings are made from 1144 heat treated steel and the retainer ring is made out of aluminum. All components are DFARS and RoHS compliant.

    SLOTTED LOCATOR
    TEMPLATE BUSHINGS

     


    SLOTTED LOCATOR TEMPLATE BUSHINGS — USA
    (ORDER BUSHING AND RETAINER RING SEPARATELY)

    PART NO. PIN
    DIA
    A B
    DIA
    C
    DIA
    D
    DIA
    E L RETAINER
    RING
    PART NO.
    TEMPLATE
    THICKNESS
    G
    DIA
    H
    CL-40-SLTB-.1875 3/16 .1876/.1882 3/8 .625 .725 5/8-18
    LH
    1/2 TTR-40-6 .047-.125 3/4 3/8
    TTR-40-5 .126-.188 5/16
    TTR-40-3 .189-.375 3/16
    CL-40-SLTB-.1935 #10 .1936/.1942 3/8 .625 .725 5/8-18
    LH
    1/2 TTR-40-6 .047-.125 3/4 3/8
    TTR-40-5 .126-.188 5/16
    TTR-40-3 .189-.375 3/16
    CL-40-SLTB-.2500 1/4 .2501/.2507 3/8 .625 .725 5/8-18
    LH
    1/2 TTR-40-6 .047-.125 3/4 3/8
    TTR-40-5 .126-.188 5/16
    TTR-40-3 .189-.375 3/16
    CL-48-SLTB-.3125 5/16 .3126/.3132 7/16 .750 .850 3/4-16
    LH
    1/2 TTR-48-6 .047-.125 1 3/8
    TTR-48-5 .126-.188 5/16
    TTR-48-3 .189-.375 3/16
    CL-48-SLTB-.3750 3/8 .3752/.3757 1/2 .750 .850 3/4-16
    LH
    1/2 TTR-48-6 .047-.125 1" 3/8
    TTR-48-5 .126-.188 5/16
    TTR-48-3 .189-.375 3/16
    CL-48-SLTB-.5000 1/2 .5001/.5007 5/8 .750 .850 3/4-16
    LH
    1/2 TTR-48-6 .047-.125 1" 3/8
    TTR-48-5 .126-.188 5/16
    TTR-48-3 .189-.375 3/16
    CL-64-SLTB-.6250 5/8 .6251/.6257 3/4 1.000 1.000 1"-14
    LH
    5/8 TTR-64-6 .047-.125 1"-1/4 3/8
    TTR-64-5 .126-.188 5/16
    TTR-64-3 .189-.375 3/16
    CL-64-SLTB-.7500 3/4 .7501/.7510 13/16 1.000 1.000 1"-14
    LH
    5/8 TTR-64-6 .047-.125 1"-1/4 3/8
    TTR-64-5 .126-.188 5/16
    TTR-64-3 .189-.375 3/16



    SOCKET-TYPE INSTALLATION TOOLS
    PART NO. FOR INSTALLING RETAINER RINGS PRICE
    NET
    TTBT-24 TTR-24-3 TTR-24-5 TTR-24-6 10.05
    TTBT-32 TTR-32-3 TTR-32-5 TTR-32-6 11.66
    TTBT-40 TTR-40-3 TTR-40-5 TTR-40-6 13.26
    TTBT-48 TTR-48-3 TTR-48-5 TTR-48-6 14.87
    TTBT-64 TTR-64-3 TTR-64-5 TTR-64-6 15.67

    View as Grid List
    Sort by
    Display per page

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-40-3

    SKU: CL-TTR-40-3
    MPN: TTR-40-3
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-40-5

    SKU: CL-TTR-40-5
    MPN: TTR-40-5
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-40-6

    SKU: CL-TTR-40-6
    MPN: TTR-40-6
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-48-3

    SKU: CL-TTR-48-3
    MPN: TTR-48-3
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-48-5

    SKU: CL-TTR-48-5
    MPN: TTR-48-5
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-48-6

    SKU: CL-TTR-48-6
    MPN: TTR-48-6
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-64-3

    SKU: CL-TTR-64-3
    MPN: TTR-64-3
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-64-5

    SKU: CL-TTR-64-5
    MPN: TTR-64-5
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    RETAINER RING FOR THREADED TEMPLATE BUSHING CL-TTR-64-6

    SKU: CL-TTR-64-6
    MPN: TTR-64-6
    Email Sales for Pricing
    These Slotted Locator Bushings are designed for thin template jig plates from 3/64" to 3/8" thick. Use with L Pins, T Pins, or Shoulder Pins to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Bushings are held in place by a threaded Retainer Ring (order separately). Flush contact of the Retainer Ring against the jig plate ensures perpendicularity. OD serrations prevent the bushing from rotating. Threaded Template Bushings can be easily removed to replace or reuse.

    Slotted Locator Template Bushings