5000 psi max
Lever arm slides forward for extra reach as it pivots into clamping position. Rugged design provides high force with excellent protection against flood coolant, chips, and welding spatter. Extremely small base area. Lever arm is designed to resist side forces at the clamping point. Dual mounting capability: all clamps are ready for standard fittings and manifold mounting. All units are ready for optional position sensing.
Available in one clamp size, with the following clamping force at 5000 psi:
Applying fluid pressure to the A (clamping) port advances the piston, which causes the clamping arm to slide forward in its side slots as it pivots. Switching pressure to the B (unclamping) port positively retracts the piston and the attached clamping arm.
The clamping lever must complete its full sliding pivot motion and start its downward clamping stroke before contacting the workpiece. In conditions with excessive chips, the sliding slots may need to be cleaned occasionally.
Two mounting options: 1) for low mounting, install cylindrical base in a bored hole, then fasten housing to base plate with two socket-head cap screws; 2) for high mounting, fasten optional intermediate plate to base plate with two socket-head cap screws, then fasten clamp to intermediate plate with two socket-head cap screws. Tighten cap screws to recommended torque in table.
Two 1/8" BSPP ports, A for clamping, B for unclamping. For optional manifold mounting, use the A and B manifold ports underneath the clamp by unscrewing the sealing plugs and installing two CLR-9210-132-F Connecting Inserts (also install two CLR-811-F Port Plugs in the 1/8" BSPP ports). Do not use NPT fittings.
All units are ready to install position sensing. Proximity switches can be installed in either the right or left side. Order two CLR-3829-198-PM inductive proximity switches, and two CLR-3829-099-PM right-angle push plugs with cable. For pneumatic position sensing, order two CLR-3612-033-PM pneumatic jets.
Housing and clamping arm > Steel. DFARS and RoHS compliant.