This plate-lifting system consists of a weld-in base and a totally removable shackle assembly, allowing the plate surface to remain totally free of obstructions after lifting. No tools are required for installing or removing the shackle assembly. To install, first, insert the Scissor-Lok™ Tool, then attach the anchor shackle with either the bolt provided or with a Fast Lok™ Detent Pin. The forged alloy-steel shackle pivots a full 180° but does not rotate. 10000 lbs load capacity. Patent pending. Made in the USA.
Since these hoist rings do not rotate, Install so that lifting force is applied in the pivoting direction. Rated load capacity applies to the hoist-ring assembly only. Plate material must also be capable of supporting the applicable weight.
Hoist-Ring Safety Precautions
Fast-Lok™ Detent Pin
Forged Anchor Shackle
Scissor-Lok™ Tool ready for insertion into Fast-Lok™ Base
Scissor-Lok™ Tool in lifting position after insertion into Fast-Lok™ Base
The Fast-Lok™ Base should be permanently installed by cutting a hole in the plate and welding in place, flush with the surface. Weld around the entire perimeter of the base (certified welding). Since these hoist rings do not rotate, install so that lifting force is applied in the pivoting direction.
Alloy steel, heat treated, black oxide finish. 100% magnaflux inspected. DFARS and RoHS compliant.
COMPLETE SCISSOR-LOK™ ASSEMBLY
(INCLUDES ALL FOUR COMPONENTS BELOW)
FORGED ANCHOR SHACKLE
FAST-LOK™ DETENT PIN