Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    QIS Downthrust Vise Jaws (Quick Insert System)

    View as Grid List
    Sort by
    Display per page

    Base Jaws with Permanent Magnets

    SKU: CL-Base Jaws with Permanent Magnets
    MPN: Base Jaws with Permanent Magnets
    Email Sales for Pricing
    Base jaws are used together with jaw inserts as part of our Quick Insert System (QIS). Base jaws are firmly fastened to the vise using two socket-head cap screws. These precision jaws have two permanent magnets and a center groove to engage the guide pin of the jaw insert.

    Plain Jaw Inserts

    SKU: CL-Plain Jaw Inserts
    MPN: Plain Jaw Inserts
    Email Sales for Pricing
    Plain Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These precision downthrust flat jaws have a smooth contact surface. Use Plain Jaw Inserts either in pairs, or with another QIS jaw insert.

    Radiused Jaw Inserts

    SKU: CL-Radiused Jaw Inserts
    MPN: Radiused Jaw Inserts
    Email Sales for Pricing
    Radiused Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These downthrust jaws have a radiused contact surface for secure gripping on unfinished workpieces, such as castings or forgings. Use Radiused Jaw Inserts either in pairs, or with another QIS jaw insert.

    Serrated Jaw Inserts

    SKU: CL-Serrated Jaw Inserts
    MPN: Serrated Jaw Inserts
    Email Sales for Pricing
    Serrated Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These precision downthrust flat jaws have a serrated contact surface for extra gripping. Use Serrated Jaw Inserts either in pairs, or with another QIS jaw insert.

    Side-Stop Jaw Inserts

    SKU: CL-Side-Stop Jaw Inserts
    MPN: Side-Stop Jaw Inserts
    Email Sales for Pricing
    Side-Stop Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These precision downthrust flat jaws have a smooth contact surface and an integral side stop. Side-Stop Jaw Inserts should be mounted on the fixed-jaw side (for positional accuracy), together with a Plain Jaw Insert on the sliding-jaw side.

    SlimFlex Step Jaw Inserts for 3-Side Machining

    SKU: CL-SlimFlex Step Jaw Inserts for 3-Side Machining
    MPN: SlimFlex Step Jaw Inserts for 3-Side Machining
    Email Sales for Pricing
    SlimFlex Step Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). SlimFlex Step Jaws are designed especially for horizontal machining centers, to allow clear access from 3 sides when machining small workpieces. These versatile jaws have sliding step inserts that can be easily adjusted to the workpiece's width with the help of the integral scale (workpiece needs to extend slightly wider than the step inserts to allow machining the entire surface of both sides). These sliding inserts are reversible, to provide both a high and a low step. Soft blank steel inserts are also available. SlimFlex Step Jaws allow clamping rectangular workpieces up high in the vise without using parallel blocks, providing tool clearance between the workpiece and the vise bed. Steps are precision ground to maintain accurate vertical and horizontal location. Use Slimflex Step Jaw Inserts only in pairs.

    Soft Blank jaw Inserts

    SKU: CL-Soft Blank jaw Inserts
    MPN: Soft Blank jaw Inserts
    Email Sales for Pricing
    Soft Blank Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). Similar to Plain Jaw Inserts, except furnished as soft, oversize blanks for machining a custom vise-jaw fixture. Use Soft Blank Jaw Inserts either in pairs, or with another QIS jaw insert.

    Step Jaw Inserts

    SKU: CL-Step Jaw Inserts
    MPN: Step Jaw Inserts
    Email Sales for Pricing
    Step Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These versatile downthrust jaws allow clamping rectangular workpieces up high in the vise without using parallel blocks. This allows raising short workpieces for easier access, and also provides tool clearance between the workpiece and the vise bed. Each Step Jaw Insert has both a high and a low step. Steps are precision ground to maintain accurate vertical and horizontal location. Use Step Jaw inserts only in pairs.

    V Jaw Inserts

    SKU: CL-V Jaw Inserts
    MPN: V Jaw Inserts
    Email Sales for Pricing
    V Jaw Inserts are used together with base jaws as part of our Quick Insert System (QIS). These precision downthrust jaws have two 120° V grooves, to allow clamping cylindrical workpieces in either horizontal or vertical position. V Jaw Inserts are usually mounted on the fixed-jaw side (for positional accuracy), together with a Plain Jaw Insert on the sliding-jaw side. V Jaw Inserts can also be used in pairs.

    QIS Downthrust Vise Jaws (Quick Insert System)