JW WINCO 8TKR5 KRSK-2.5-1/2X13-E-ST KNURLED NUT KRSK knurled nuts are used for applications which require higher durability than plastic or aluminum, yet appearance is essential. Steel Knob , Tapped blind bore Type KRSK Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*
JW Winco WN9100-1.97-1/2X13-6-A NY-LEV LEVELING 8T6WP4 Made in the U.S.A., "NY-LEV®" nylon base machinery mounts are a quality and economical solution to your leveling and height adjustment needs. Threaded stud swivels 15° in all directions. It is not recommended to move the stud beyond the 15° mark, otherwise the ball end of the stud can pop out of its seat and both stud and pad will separate. Steel Thread Material with Zinc Plated Thread Finish. Nylon Base Material with Matte Base Finish WN 9100 Stud Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*
GN300-45-10X32 ADJUSTABLE LEVER STEEL - 1TA01K GN 300 adjustable levers have proven to be ideal wherever parts have to be clamped in a confined space or in a particular lever position. The insert is connected to the lever via serrations that can easily be disengaged.
Pulling the lever upwards disengages the serrations, allowing it to be swiveled to the ideal clamping position. When releasing the lever, the serrations automatically re-engage. Zinc Die-Cast, Powder Coat: Black GN300 Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*
GN40-40-1/2X13-100-A1-SK LEVELING FEET GN 40 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable. Steel Stud Material with Zinc Plated Stud Surface Finish. Steel Plate Material with Zinc Plating Plate Finish GN 40 Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*
GN40-40-1/2X13-150-A1-SK LEVELING FEET GN 40 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable. Steel Stud Material with Zinc Plated Stud Surface Finish. Steel Plate Material with Zinc Plating Plate Finish GN 40 Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*
GN40-40-1/2X13-75-A0-S LEVELING FEET GN 40 levelling feet can be used in a host of combinations of base plates and adjustable spindle versions. The base plate with the rubber underlay protects sensitive surfaces and reduces lateral slippage. The levelling feet are supplied fully assembled and are not removable. Steel Stud Material with Zinc Plated Stud Surface Finish. Steel Plate Material with Zinc Plating Plate Finish GN 40 Standard Sheet *All JW Winco orders must meet a $75 minimum or there will be a $10 processing fee.*