Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Round Grippers (Hardened Tool Steel, Serrated)

    Round Grippers (Hardened Tool Steel, Serrated)

    Supports, Rests & Feet

    Serrated Round Grippers are hard, replaceable inserts that provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel grippers shown here are the most economical and impact resistant. Available in diameters from 1/4 to 1" (10 to 25mm in metric). Made in the USA.

    Application Information

    1. Simple customized blank chuck jaws with serrated grippers installed can provide holding force comparable to fully serrated hard jaws.
    2. Serrated grippers installed in a fixture's locating surfaces dramatically increase resistance to movement by embedding themselves in the workpiece.

    Installation

    These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    Material

    M-2 tool steel, heat treated Rc 60-62, black oxide finish. DFARS and RoHS compliant.

    View as Grid List
    Sort by
    Display per page

    ROUND GRIPPER CL-10-RG

    SKU: CL-10-RG
    MPN: CL-10-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-12-RG

    SKU: CL-12-RG
    MPN: CL-12-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-16-RG

    SKU: CL-16-RG
    MPN: CL-16-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-4-RG

    SKU: CL-4-RG
    MPN: CL-4-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-6-RG

    SKU: CL-6-RG
    MPN: CL-6-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-8-RG

    SKU: CL-8-RG
    MPN: CL-8-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-CLM-10-RG

    SKU: CL-CLM-10-RG
    MPN: CLM-10-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-CLM-12-RG

    SKU: CL-CLM-12-RG
    MPN: CLM-12-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    ROUND GRIPPER CL-CLM-16-RG

    SKU: CL-CLM-16-RG
    MPN: CLM-16-RG
    Email Sales for Pricing
    Serrated Round Grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. These grippers are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. The hardened tool steel gripper shown here are the most economical and impact resistant. Made in USA.

    SIZES: Available in the following diameters — see Dimensions page for part numbers:
     1/4 
     3/8 10mm
     1/2 12mm
     5/8 16mm
     3/4 20mm
     1" 25mm

    INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (1/4"-diameter grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. When grippers are installed in a hole, they should project 50 to 100% of serration height for maximum effectiveness (serration height is .047" on grippers with .094" x 90° serrations, .062" on grippers with .125" x 90° serrations). Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.

    Round Grippers (Hardened Tool Steel, Serrated)