Drill Bushing - Head Press Fit H134BL
Headed press fit drill bushings are dimensionally identical to the headless range, but for the head. Headed press fit
drill bushings contain a shoulder at the top of the bush to allow greater axial force on the jig, and aids where it is
desired, to feed down to a dead stop. The head of the bushing can be pressed into the plate easier and can be left either exposed above the plate surface or
counter bored to sit flush.
Concentricity Tolerance: .0003" T.I.R. Max
Drill Size: #54
Hardness: RC 62-64
Inside Dia.: 0.055"
Inside Dia. Tolerance: +.0001- +.0004"
Material: 52100 Thru Hardened
Outside Dia.: 13/64"
Outside Dia. Tolerance: +0.0015 - +0.0012"
Length under Head: 1/4"
Head Thk: 0.09375
Head Dia: 0.296875
H-TYPE Technical Specs