{"title":"Halder Floating Clamps","description":"\u003cdiv style=\"text-align: center;\"\u003e\u003cimg style=\"margin-right: 190px; margin-bottom: 16px; margin-left: 190px; float: none;\" alt=\"Halder Floating Clamps\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/IM0008738_Foto_Uebersicht_small_a76a08fd-8aa6-4983-acd1-265bcb220a38_240x240.png?v=1747767089\"\u003e\u003c\/div\u003e\n\u003ch1 style=\"text-align: center;\"\u003eHalder Floating Clamps | Self-Adjusting Workholding Solutions | Freer Tool\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eHalder floating clamps are workholding clamps designed to provide \u003c\/span\u003e\u003cstrong\u003erepeatable clamping while accommodating minor variation\u003c\/strong\u003e\u003cspan\u003e in part position, surface angle, or stack-up (application dependent). “Floating” or compensating clamp designs are commonly used in fixtures where parts may not seat perfectly the same way every cycle, or where you want the clamp to self-adjust for better contact and more consistent clamp-up. These clamps can be a strong choice for production environments focused on repeatability and reduced setup sensitivity (application dependent).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePosition-Flexible Clamps for Low-Warpage Workpiece Clamping -\u003c\/strong\u003e Floating clamps, so-called position-flexible or clamps which float, are used to clamp and simultaneous support overdetermined or additional clamping points on components. The floating clamp is spring loaded and contacts the workpiece with a slight spring force. Thereby a low-warpage clamping of components is guaranteed. Even sophisticated workpieces can be clamped for reinforcement to beads, ribs and shackles. This inhibits vibrations during processing.\u003c\/p\u003e\n\u003cp\u003eThe extensive product range includes various types ex stock:\u003c\/p\u003e\n\u003cp\u003eCompact version with reduced height; supporting force 8 kN: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFloating clamp, compact version, with combinded clamping and locking, M 12\u003c\/li\u003e\n\u003cli\u003eFloating clamp, compact version, with seperate clamping and locking, M 12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStandard version; supporting force 8 kN:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFloating clamp with combinded clamping and locking, M 12\u003c\/li\u003e\n\u003cli\u003eFloating clamp with seperate clamping and locking, M 12\u003c\/li\u003e\n\u003cli\u003eStandard clamping jaws for floating clamp M 12\u003c\/li\u003e\n\u003cli\u003eClamping jaws for floating clamp M 12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eParticularly suitable for large components with heavy processing; supporting force 25 kN:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFloating clamp with combinded clamping and locking, M 16\u003c\/li\u003e\n\u003cli\u003eClamping jaws for floating clamp M 16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupporting elements and  compensating elements, like the supporting element (23220.0400) and the bedding support (23220.0085 - .0450), complete the range of topics.\u003c\/p\u003e","products":[{"product_id":"23320-0008","title":"Floating Clamp - 23320.0008","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eFloating Clamps compact construction, combined clamping and locking M 12 23320.0008.\u003cbr\u003eEH 23320\u003cbr\u003eThe floating clamp is used to clamp and support additional clamping points on components.\u003cbr\u003eThe benefits of the floating clamp are:\u003cbr\u003eavoids vibration during the processing\u003cbr\u003eclamps ribs, beads and shackles to reinforce clamped components\u003cbr\u003edistortion-free clamping of raw parts\u003cbr\u003ecompact version with reduced height.\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0008__en.pdf\"\u003e\u003cb\u003eHalder 23320.0008 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe floating clamp is used to \u003cb\u003eclamp and support\u003c\/b\u003e additional clamping points on components.\u003c\/p\u003e\u003cp\u003eThe benefits of the floating clamp are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eavoids vibration during the processing\u003c\/li\u003e\n\u003cli\u003eclamps ribs, beads and shackles to reinforce clamped components\u003c\/li\u003e\n\u003cli\u003edistortion-free clamping of raw parts\u003c\/li\u003e\n\u003cli\u003ecompact version with reduced height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdjustable body\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAluminium, red anodised\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBody\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated and ground\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the floating clamp (mounting holes for M 6, see drawing ) onto the device.\u003c\/li\u003e\n\u003cli\u003eAdjust the height limit stop and the rotating area with the sleeve and clamp with a set screw (4x WS 2.5). When setting the height limit, consider tolerance of workpiece.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eOperation\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePush the floating clamp downwards.\u003c\/li\u003e\n\u003cli\u003ePivot the clamping jaws in as far as possible. The floating clamp contacts the bottom of the work piece with a slight spring load.\u003c\/li\u003e\n\u003cli\u003eTighten the floating clamp with a hexagonal nut (WS 18) having a min. torque of 15 Nm and a maximum torque of 30 Nm. \u003cb\u003eIn the clamping process, the workpiece is clamped and simultaneously supported.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eReleasing is done in reverse order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor specific clamping situations, the standard clamping jaws supplied can be exchanged or replaced (see catalogue drawing: screw ISO4762-M8-12.9, Mmax.=43Nm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAccessories\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAs an accessory, we offer clamping jaws with an increased clamping range, refer to 23320.0050-.0058, as well as pivot jaws, refer to 23320.0148-.0156.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0008__en.pdf\"\u003e\u003cb\u003eHalder 23320.0008 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943573569741,"sku":"EH-23320.0008","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199708_0.jpg?v=1628879489"},{"product_id":"23320-0154","title":"Clamping Jaw - 23320.0154","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws for floating clamp M 12 23320.0154.\u003cbr\u003eEH 23320\u003cbr\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003cbr\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003cbr\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003cbr\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece. \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0154__en.pdf\"\u003e\u003cb\u003eHalder 23320.0154 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0154__en.pdf\"\u003e\u003cb\u003eHalder 23320.0154 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943573864653,"sku":"EH-23320.0154","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199556_0.jpg?v=1628879495"},{"product_id":"23320-0148","title":"Clamping Jaw - 23320.0148","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws for floating clamp M 12 23320.0148.\u003cbr\u003eEH 23320\u003cbr\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003cbr\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003cbr\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003cbr\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece. \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0148__en.pdf\"\u003e\u003cb\u003eHalder 23320.0148 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eBall\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBall-bearing steel\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0148__en.pdf\"\u003e\u003cb\u003eHalder 23320.0148 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943574618317,"sku":"EH-23320.0148","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199555_0.jpg?v=1628879494"},{"product_id":"23320-0012","title":"Floating Clamp - 23320.0012","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eFloating Clamps combined clamping and locking M 12 23320.0012.\u003cbr\u003eEH 23320\u003cbr\u003eThe floating clamp is used to clamp and support additional clamping points on components.\u003cbr\u003eThe benefits of the floating clamp are:\u003cbr\u003eavoids vibration during the processing\u003cbr\u003eclamps ribs, beads and shackles to reinforce clamped components\u003cbr\u003edistortion-free clamping of raw parts.\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0012__en.pdf\"\u003e\u003cb\u003eHalder 23320.0012 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe floating clamp is used to \u003cb\u003eclamp and support\u003c\/b\u003e additional clamping points on components.\u003c\/p\u003e\u003cp\u003eThe benefits of the floating clamp are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eavoids vibration during the processing\u003c\/li\u003e\n\u003cli\u003eclamps ribs, beads and shackles to reinforce clamped components\u003c\/li\u003e\n\u003cli\u003edistortion-free clamping of raw parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdjustable body\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAluminium, red anodised\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBody\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated and ground\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the floating clamp (M12 connection thread) onto the device with a wrench (WS46).\u003c\/li\u003e\n\u003cli\u003eAdjust the height limit stop and the rotating area with the red sleeve and clamp with a set screw (3xWS2.5). When setting the height limit, consider tolerance of workpiece.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eOperation\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePush the floating clamp downwards.\u003c\/li\u003e\n\u003cli\u003ePivot the clamping jaws in as far as possible. The floating clamp contacts the bottom of the workpiece with a slight spring load.\u003c\/li\u003e\n\u003cli\u003eTighten the floating clamp with a hexagonal nut (WS 18) having a min. torque of 15 Nm and a maximum torque of 30 Nm. \u003cb\u003eIn the clamping process, the workpiece is clamped and simultaneously supported.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eReleasing is done in reverse order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe thread bore must always be closed for safe functioning, e.g. set screw M 12 x 10.\u003c\/p\u003e\u003cp\u003eFor specific clamping situations, the standard clamping jaws supplied can be exchanged or replaced (see catalogue drawing: screw ISO4762-M8-12.9, Mmax.=43Nm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eReferences\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdditional flexible possibility of fitting with holder 23470.0250 or holding plate for down-hold clamps 23210.0740.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAccessories\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAs an accessory, we offer clamping jaws with an increased clamping range, refer to 23320.0050-.0058, as well as pivot jaws, refer to 23320.0148-.0156.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0012__en.pdf\"\u003e\u003cb\u003eHalder 23320.0012 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943575077069,"sku":"EH-23320.0012","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199709_0.jpg?v=1628879490"},{"product_id":"23320-0156","title":"Clamping Jaw - 23320.0156","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws for floating clamp M 12 23320.0156.\u003cbr\u003eEH 23320\u003cbr\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003cbr\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003cbr\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003cbr\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece. \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0156__en.pdf\"\u003e\u003cb\u003eHalder 23320.0156 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0156__en.pdf\"\u003e\u003cb\u003eHalder 23320.0156 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943575208141,"sku":"EH-23320.0156","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199557_0.jpg?v=1628879496"},{"product_id":"23320-0016","title":"Floating Clamp - 23320.0016","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eFloating Clamps combined clamping and locking M 16 23320.0016.\u003cbr\u003eEH 23320\u003cbr\u003eThe floating clamp is used to clamp and support additional clamping points on components.\u003cbr\u003eThe benefits of the floating clamp are:\u003cbr\u003eespecially suitable for large workpieces\u003cbr\u003eavoids vibration during the processing\u003cbr\u003eclamps ribs, beads and shackles to reinforce clamped components\u003cbr\u003edistortion-free clamping of raw parts\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0016__en.pdf\"\u003e\u003cb\u003eHalder 23320.0016 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe floating clamp is used to \u003cb\u003eclamp and support\u003c\/b\u003e additional clamping points on components.\u003c\/p\u003e\u003cp\u003eThe benefits of the floating clamp are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eespecially suitable for large workpieces\u003c\/li\u003e\n\u003cli\u003eavoids vibration during the processing\u003c\/li\u003e\n\u003cli\u003eclamps ribs, beads and shackles to reinforce clamped components\u003c\/li\u003e\n\u003cli\u003edistortion-free clamping of raw parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdjustable body\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAluminium, red anodised\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBody\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated and ground\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the floating clamp (M 16 connection thread) onto the device with a wrench (WS 55).\u003c\/li\u003e\n\u003cli\u003eAdjust the height limit stop and the rotating area with the red sleeve and clamp with a set screw (3 x WS 3). When setting the height limit, consider tolerance of workpiece.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eOperation\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePush the floating clamp downwards.\u003c\/li\u003e\n\u003cli\u003ePivot the clamping jaws in as far as possible.The floating clamp contacts the bottom of the workpiece with a low spring load.\u003c\/li\u003e\n\u003cli\u003eTighten the floating clamp with a hexagonal nut (WS24) having a min. torque of 50Nm and a maximum torque of 115Nm. \u003cb\u003eIn the clamping process, the workpiece is clamped and simultaneously supported.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eReleasing is done in reverse order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAccessories\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor custom clamping situation, the standard upper clamping jaw supplied can be replaced by the exchange clamping jaws (23320.0062 \/ .0064 \/ .0066).\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0016__en.pdf\"\u003e\u003cb\u003eHalder 23320.0016 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943588970701,"sku":"EH-23320.0016","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199711_0.jpg?v=1628879493"},{"product_id":"23320-0014","title":"Floating Clamp - 23320.0014","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eFloating Clamps separate clamping and locking M 12 23320.0014.\u003cbr\u003eEH 23320\u003cbr\u003eFloating clamps with separate clamp and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping and supporting force can individually be designed.\u003cbr\u003eThe benefits of the floating clamp are:\u003cbr\u003eavoids vibration during the processing\u003cbr\u003eclamps ribs, beads and shackles to reinforce clamped components\u003cbr\u003edistortion-free clamping of raw parts.\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0014__en.pdf\"\u003e\u003cb\u003eHalder 23320.0014 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eFloating clamps with separate clamp and locking are used to clamp and support\u003c\/b\u003e additional clamping points \u003cb\u003eon extremly pliable\u003c\/b\u003e workpieces. Both, clamping and supporting force can individually be designed.\u003c\/p\u003e\u003cp\u003eThe benefits of the floating clamp are:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eavoids vibration during the processing\u003c\/li\u003e\n\u003cli\u003eclamps ribs, beads and shackles to reinforce clamped components\u003c\/li\u003e\n\u003cli\u003edistortion-free clamping of raw parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdjustable body\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAluminium, blue anodised\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBody\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated and ground\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the floating clamp (M 12 connection thread) onto the device with a wrench (WS 46).\u003c\/li\u003e\n\u003cli\u003eAdjust the height limit stop and the rotating area with the blue sleeve and clamp with a set screw (3 x WS 2.5). When setting the height limit, consider tolerance of workpiece.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eOperation\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePush the floating clamp downward.\u003c\/li\u003e\n\u003cli\u003ePivot the clamping jaws in.\u003c\/li\u003e\n\u003cli\u003eRelease floating clamp. The bottom jaw contacts the workpiece with a low spring force.\u003c\/li\u003e\n\u003cli\u003eTighten the fixture nut (WS 18) having a maximum torque of 15 Nm. \u003cb\u003eThe workpiece is clamped; the clamp is still floating.\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eThereafter tighten the hexagon collar nut (WS 10 - max. torque 10 Nm).\u003c\/li\u003e\n\u003cli\u003eThe clamping process is finished.\u003c\/li\u003e\n\u003cli\u003eReleasing is done in reverse order: release hexagon collar nut (WS 10) - release fixture nut (WS 18) - pivot the clamping jaws out.\u003c\/li\u003e\n\u003cli\u003eFloating clamp is in end position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe thread bore must always be closed for safe functioning, e.g. set screw M 12 x 10.\u003c\/p\u003e\u003cp\u003eFor specific clamping situations, the standard clamping jaws supplied can be exchanged or replaced (see catalogue drawing: screw ISO4762-M8-12.9, Mmax.=43Nm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eReferences\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAdditional flexible possibility of fitting with holder 23470.0250 or holding plate for down-hold clamps 23210.0740.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAccessories\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAs an accessory, we offer clamping jaws with an increased clamping range, refer to 23320.0050-.0058, as well as pivot jaws, refer to 23320.0148-.0156.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0014__en.pdf\"\u003e\u003cb\u003eHalder 23320.0014 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943596146893,"sku":"EH-23320.0014","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0199710_0.jpg?v=1628879491"},{"product_id":"clamping-jaws-233200054","title":"CLAMPING JAWS - 23320.0054","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 12\/upper exchange clamping jaw | Clamping range of=4 mm \/ Clamping range to=16 mm | 23320.0054\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0054__en.pdf\"\u003e\u003cb\u003eHalder 23320.0054 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/á.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0054__en.pdf\"\u003e\u003cb\u003eHalder 23320.0054 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943835418829,"sku":"EH-23320.0054","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0137075_0.jpg?v=1628888604"},{"product_id":"clamping-jaws-233200064","title":"CLAMPING JAWS - 23320.0064","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 16\/upper exchange clamping jaw | Clamping range of=23 mm \/ Clamping range to=38 mm | 23320.0064\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0064__en.pdf\"\u003e\u003cb\u003eHalder 23320.0064 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0064__en.pdf\"\u003e\u003cb\u003eHalder 23320.0064 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943835648205,"sku":"EH-23320.0064","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0213727_0.jpg?v=1628888609"},{"product_id":"clamping-jaws-233200052","title":"CLAMPING JAWS - 23320.0052","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eStandard Clamping Jaws, for floating clamp M 12\/upper standard clamping jaw | Clamping range of=0 mm \/ Clamping range to=12 mm | 23320.0052\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0052__en.pdf\"\u003e\u003cb\u003eHalder 23320.0052 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWhen using custom-made jaws, it is important to insert the tightening screw (M 8-12.9, 43áNm) 10ámm deep into the clamp housing on the upper clamping jaw and 9ámm deep into the clamp housing on the lower clamping jaw.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0052__en.pdf\"\u003e\u003cb\u003eHalder 23320.0052 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943837843661,"sku":"EH-23320.0052","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0213725_0.jpg?v=1628888603"},{"product_id":"clamping-jaws-233200062","title":"CLAMPING JAWS - 23320.0062","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 16\/upper exchange clamping jaw | Clamping range of=0 mm \/ Clamping range to=14 mm | 23320.0062\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0062__en.pdf\"\u003e\u003cb\u003eHalder 23320.0062 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0062__en.pdf\"\u003e\u003cb\u003eHalder 23320.0062 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943838499021,"sku":"EH-23320.0062","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0213726_0.jpg?v=1628888608"},{"product_id":"clamping-jaws-233200058","title":"CLAMPING JAWS - 23320.0058","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 12\/upper exchange clamping jaw | Clamping range of=26 mm \/ Clamping range to=38 mm | 23320.0058\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0058__en.pdf\"\u003e\u003cb\u003eHalder 23320.0058 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/á.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0058__en.pdf\"\u003e\u003cb\u003eHalder 23320.0058 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943841349837,"sku":"EH-23320.0058","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0137077_0.jpg?v=1628888606"},{"product_id":"clamping-jaws-233200050","title":"CLAMPING JAWS - 23320.0050","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eStandard Clamping Jaws, for floating clamp M 12\/lower standard clamping jaw | 23320.0050\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0050__en.pdf\"\u003e\u003cb\u003eHalder 23320.0050 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eAssembly\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWhen using custom-made jaws, it is important to insert the tightening screw (M 8-12.9, 43áNm) 10ámm deep into the clamp housing on the upper clamping jaw and 9ámm deep into the clamp housing on the lower clamping jaw.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0050__en.pdf\"\u003e\u003cb\u003eHalder 23320.0050 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943842070733,"sku":"EH-23320.0050","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0213724_0.jpg?v=1628888602"},{"product_id":"clamping-jaws-233200060","title":"CLAMPING JAWS - 23320.0060","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 16\/upper standard clamping jaw | Clamping range of=10 mm \/ Clamping range to=25 mm | 23320.0060\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0060__en.pdf\"\u003e\u003cb\u003eHalder 23320.0060 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0060__en.pdf\"\u003e\u003cb\u003eHalder 23320.0060 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943842201805,"sku":"EH-23320.0060","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0137078_0.jpg?v=1628888607"},{"product_id":"clamping-jaws-233200056","title":"CLAMPING JAWS - 23320.0056","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 12\/upper exchange clamping jaw | Clamping range of=15 mm \/ Clamping range to=27 mm | 23320.0056\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0056__en.pdf\"\u003e\u003cb\u003eHalder 23320.0056 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.\u003c\/p\u003e\u003cp\u003eThe upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.\u003c\/p\u003e\u003cp\u003eIn the upper clamping jaw with female thread M 8 (23320.0154 \/á.0156 - picture 4 + 5) different standard parts can be screwed in as required.\u003c\/p\u003e\u003cp\u003eThe lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClamping Jaws\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe tightening torque of the floating clamp must be adapted\/reduced situationally. Observe the surface pressure due the the reduced contact surface of the clamping jaws.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0056__en.pdf\"\u003e\u003cb\u003eHalder 23320.0056 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943843840205,"sku":"EH-23320.0056","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0137076_0.jpg?v=1628888605"},{"product_id":"clamping-jaws-233200066","title":"CLAMPING JAWS - 23320.0066","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eClamping Jaws, for floating clamp M 16\/upper exchange clamping jaw | Clamping range of=35 mm \/ Clamping range to=50 mm | 23320.0066\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0066__en.pdf\"\u003e\u003cb\u003eHalder 23320.0066 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e*\u003cb style=\"color:red;\"\u003ePlease contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.\u003c\/b\u003e*\u003c\/b\u003e\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003cp\u003eThe clamping jaws can be used for the floating clamp 23320.0016 to increase or decrease the clamping range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCase hardened steel, nitrided, manganese phosphate treated\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/files\/DS_23320_0066__en.pdf\"\u003e\u003cb\u003eHalder 23320.0066 Data Sheet\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Halder","offers":[{"title":"Default Title","offer_id":39943844004045,"sku":"EH-23320.0066","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0213729_0.jpg?v=1628888610"}],"url":"https:\/\/www.freertool.com\/en-ca\/collections\/halder-floating-clamps.oembed","provider":"Freer Tool and Supply","version":"1.0","type":"link"}