Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Edge Grippers

    Edge Grippers

    Supports, Rests & Feet

    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts that provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Available in square sizes from 3/8 to 1" (10 to 25mm in metric), most in a choice of thicknesses and serration sizes. Made in the USA.

    Application Information

    Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw.

    Installation

    Edge Grippers should be mounted in a flat-bottom recess that provides support behind the gripper. Fasten with a standard socket-head cap screw (on the largest three sizes, a low-head cap screw can be used to keep the screw head below the top surface). The serrated face should project 50 to 100% of serration height for maximum effectiveness (serration height is .062" on grippers with .125" x 90° fine serrations, .047" on grippers with .094" x 90° extra-fine serrations, .and .031" on grippers with .062" x 90° super-fine serrations).

    Material

    M-2 tool steel, heat treated Rc 60-62, black oxide finish. DFARS and RoHS compliant.

    View as Grid List
    Sort by
    Display per page

    EDGE GRIPPER CL-10-EG-4

    SKU: CL-10-EG-4
    MPN: CL-10-EG-4
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-10-EG-4-EF

    SKU: CL-10-EG-4-EF
    MPN: CL-10-EG-4-EF
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-10-EG-6

    SKU: CL-10-EG-6
    MPN: CL-10-EG-6
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-10-EG-6-EF

    SKU: CL-10-EG-6-EF
    MPN: CL-10-EG-6-EF
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-10-EG-8

    SKU: CL-10-EG-8
    MPN: CL-10-EG-8
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-10-EG-8-EF

    SKU: CL-10-EG-8-EF
    MPN: CL-10-EG-8-EF
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-12-EG-4

    SKU: CL-12-EG-4
    MPN: CL-12-EG-4
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-12-EG-4-EF

    SKU: CL-12-EG-4-EF
    MPN: CL-12-EG-4-EF
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    EDGE GRIPPER CL-12-EG-6

    SKU: CL-12-EG-6
    MPN: CL-12-EG-6
    Email Sales for Pricing
    Edge Grippers are helpful for applications where traditional face-mounted grippers are difficult to install. They have a useful flat profile because the mounting screw is parallel to the serrated face. Edge Grippers are ideal for mounting at the top edge of a clamping face such as a vise jaw. These serrated grippers are hard, replaceable inserts used to provide additional holding force and/or wear resistance when installed in a fixture. They are designed to slightly penetrate the workpiece to significantly increase gripping force, rather than relying on static friction alone. Made in USA.

    Edge Grippers