Industrial Magnetics MAG-MATE ® Dynamiclift Magnet 150 Lb DL0150

Brand: INDUSTRIAL MAGNETICS

Industrial Magnetics MAG-MATE ® Dynamiclift Magnet 150 Lb DL0150

SKU: IM-DL0150
MPN: DL0150

  • $488.34
    Unit price per 
Shipping calculated at checkout.

Only 0 left!

*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**


Short Description

Industrial Magnetics MAG-MATE Dynamiclift Magnet 150 Lb DL0150. DynamicLift Magnet. These lightweight and powerful Rare Earth permanent lift magnets can be used on flat or round surfaces and contain an internal release On/Off device that does not contact or damage the surface of the part being lifted.

*Industrial Magnetics orders must meet a minimum of $75*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**

Full Description

Industrial Magnetics MAG-MATE® Dynamiclift Magnet 150 Lb DL0150

DynamicLift Magnet

These lightweight and powerful Rare Earth permanent lift magnets can be used on flat or round surfaces and contain an internal release On/Off device that does not contact or damage the surface of the part being lifted. DynamicLifts also offer excellent holding on thin gauge ferrous metals to comparable Rare Earth lift magnets.

  • On/Off actuated Rare Earth design
  • Lifts flat or round loads horizontally and flat loads vertically
  • Heat resistant up to 180°F (82°C)
  • Top rotating and Locking On/Off handle
  • 3:1 Design Factor
  • ASME B30.20 BHT-1 Design Category B Service Class 3
Literature Download: DynamicLift Magnet
Rare Earth DynamicLift Magnets
Overall Magnet Bail
Model No. WLL (lbs) Ht. (in) Ln. (in) Wt. (lbs) Ht. (in) Wd. (in) Ln. (in) Th. (in) Ht. (in) Wd. (in)
DL0150 150 9.00 4.25 6.1 2.75 2.50 3.00 0.25 2.25 3.00
DL0334 334 9.75 5.75 13.3 3.00 4.00 4.25 0.25 2.25 4.00
Working Load Limit (WLL) in lbs & *Maximum Sheet Length For Single Magnet Use
Horizontal Flat Part / Sheet Lifting Applications
Model No. WLL at 1/4" (6' Lg) WLL at 3/8" (8' Lg) WLL at 1/2" + (8' Lg)
DL0150 150 150 150
DL0334 275 320 334
Vertical Flat Part / Sheet Lifting Applications
Model No. WLL (lbs) Minimum Thickness (in)
DL0150 37.5 1.00
DL0334 83.5 1.00
Horizontal Round Part Lifting Applications
Model No. WLL (lbs) Minimum Diameter (in) Minimum Wall Thickness (in) Max. WLL (lbs) at Min. Diameter and Thickness
DL0150 75 2.00 0.125 65
DL0334 167 4.00 0.125 100

NOTE: the Working Load Limit (WLL) values for the DynamicLift Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8 feet in length, use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Consult the factory before specifying these magnets for use on round materials. Round Item WLL Values are based on ideal conditions. Length, wall thickness, diameter and surface can all affect the magnet's performance. *Maximum sheet lengths are selected due to the sag characteristics of the specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release.

Dynamic Lift Spare Parts
Type DL0150 DL0334
ID Label 900324 900326
Lift Capacity Label 900325 900327

Check out the online HTML CheatSheet here and save the link because you might need it while composing content for a web page.