{"title":"NAAMS Clamp Arms - Custom 10mm Dowel Holes","description":"\u003cp\u003e\u003cspan\u003eFreer Tool \u0026amp; Supply’s \u003c\/span\u003e\u003cstrong\u003eNAAMS clamp arms (custom 10mm dowel holes)\u003c\/strong\u003e\u003cspan\u003e collection supports accurate, repeatable clamping in welding fixtures, assembly tooling, and automation stations where precise arm location matters. Clamp arms transfer force from power clamps to the part, and adding \u003c\/span\u003e\u003cstrong\u003ecustom 10mm dowel holes\u003c\/strong\u003e\u003cspan\u003e helps fixture builders positively locate the arm, improve alignment retention, and simplify replacement—especially in high-cycle environments where consistency is critical.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"naams-power-clamp-arm-aca3010-25-22-10-p","title":"NAAMS ACA3010-25-22-10-P Power Clamp Arm - Customized ACA010M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3010-25-22-10-P is a customized NAAMS power clamp arm based off of ACA010M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3010-25-22-10-P Power Clamp Arm - Customized ACA010M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3010-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA010M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3010-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3010M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358712709325,"sku":"FN-ACA3010-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161308_0_e2102c17-50cf-41e1-a256-33ce5f8d073b.png?v=1704724081"},{"product_id":"naams-power-clamp-arm-aca3011-25-22-10-p","title":"NAAMS ACA3011-25-22-10-P Power Clamp Arm - Customized ACA011M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3011-25-22-10-P is a customized NAAMS power clamp arm based off of ACA011M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3011-25-22-10-P Power Clamp Arm - Customized ACA011M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3011-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA011M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3011-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3011M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358713528525,"sku":"FN-ACA3011-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161309_0_d1e76c90-a544-4f55-bab1-140ad9285d2e.png?v=1704724088"},{"product_id":"naams-power-clamp-arm-aca3012-25-22-10-p","title":"NAAMS ACA3012-25-22-10-P Power Clamp Arm - Customized ACA012M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3012-25-22-10-P is a customized NAAMS power clamp arm based off of ACA012M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3012-25-22-10-P Power Clamp Arm - Customized ACA012M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3012-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA012M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3012-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3012M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358714544333,"sku":"FN-ACA3012-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161310_0_f7792fb0-726d-46db-9607-c197655440dd.png?v=1704724094"},{"product_id":"naams-power-clamp-arm-aca3020-25-22-10-p","title":"NAAMS ACA3020-25-22-10-P Power Clamp Arm - Customized ACA020M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3020-25-22-10-P is a customized NAAMS power clamp arm based off of ACA020M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3020-25-22-10-P Power Clamp Arm - Customized ACA020M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3020-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA020M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3020-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3020M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358714872013,"sku":"FN-ACA3020-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161318_0_2846d9e8-4cfa-4289-9960-d4c929535d16.png?v=1704724101"},{"product_id":"naams-power-clamp-arm-aca3021-25-22-10-p","title":"NAAMS ACA3021-25-22-10-P Power Clamp Arm - Customized ACA021M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3021-25-22-10-P is a customized NAAMS power clamp arm based off of ACA021M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3021-25-22-10-P Power Clamp Arm - Customized ACA021M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3021-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA021M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3021-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3021M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358715166925,"sku":"FN-ACA3021-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161319_0_6eb73173-8de1-41f2-ae8c-9accbe5efb4a.png?v=1704724107"},{"product_id":"naams-power-clamp-arm-aca3022-25-22-10-p","title":"NAAMS ACA3022-25-22-10-P Power Clamp Arm - Customized ACA022M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3022-25-22-10-P is a customized NAAMS power clamp arm based off of ACA022M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3022-25-22-10-P Power Clamp Arm - Customized ACA022M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3022-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA022M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3022-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3022M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358716870861,"sku":"FN-ACA3022-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161320_0_a5f25c66-0366-4097-b252-5da6aa7e4861.png?v=1704724113"},{"product_id":"naams-power-clamp-arm-aca3023-25-22-10-p","title":"NAAMS ACA3023-25-22-10-P Power Clamp Arm - Customized ACA023M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003e\n\u003cp\u003eACA3023-25-22-10-P is a customized NAAMS power clamp arm based off of ACA023M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFull Description\u003c\/h3\u003e\n\u003ch2\u003eNAAMS ACA3023-25-22-10-P Power Clamp Arm - Customized ACA023M with 10mm Dowel Holes\u003c\/h2\u003e\n\u003cp\u003eIntroducing ACA3023-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA023M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3023-25-22-10-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACA3023M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e63\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e22X22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358717558989,"sku":"FN-ACA3023-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161321_0_e0630c6a-9232-44e1-9e5e-6c5e054e38c0.png?v=1704724118"},{"product_id":"naams-power-clamp-arm-aca3024-25-22-10-p","title":"NAAMS ACA3024-25-22-10-P Power Clamp Arm - Customized ACA024M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3024-25-22-10-P is a customized NAAMS power clamp arm based off of ACA024M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3024-25-22-10-P Power Clamp Arm - Customized ACA024M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3024-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA024M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3024-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3024M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358717821133,"sku":"FN-ACA3024-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161322_0_d5a403a5-17da-4b9a-90ba-b59868457616.png?v=1704724123"},{"product_id":"naams-power-clamp-arm-aca3031-25-22-10-p","title":"NAAMS ACA3031-25-22-10-P Power Clamp Arm - Customized ACA031M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3031-25-22-10-P is a customized NAAMS power clamp arm based off of ACA031M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3031-25-22-10-P Power Clamp Arm - Customized ACA031M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3031-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA031M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3031-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3031M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358719328461,"sku":"FN-ACA3031-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161329_0_63624160-d5dc-4965-801f-71509fd82946.png?v=1704724130"},{"product_id":"naams-power-clamp-arm-aca3032-25-22-10-p","title":"NAAMS ACA3032-25-22-10-P Power Clamp Arm - Customized ACA032M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3032-25-22-10-P is a customized NAAMS power clamp arm based off of ACA032M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3032-25-22-10-P Power Clamp Arm - Customized ACA032M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3032-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA032M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3032-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3032M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.7\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358719623373,"sku":"FN-ACA3032-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161330_0_a31fa572-fc70-4f21-b6d3-6d4544d6abed.png?v=1704724136"},{"product_id":"naams-power-clamp-arm-aca3033-25-22-10-p","title":"NAAMS ACA3033-25-22-10-P Power Clamp Arm - Customized ACA033M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3033-25-22-10-P is a customized NAAMS power clamp arm based off of ACA033M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3033-25-22-10-P Power Clamp Arm - Customized ACA033M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3033-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA033M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3033-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3033M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.7\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358720016589,"sku":"FN-ACA3033-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161331_0_5f6da4fb-931a-4504-992a-788a91e77552.png?v=1704724142"},{"product_id":"naams-power-clamp-arm-aca3034-25-22-10-p","title":"NAAMS ACA3034-25-22-10-P Power Clamp Arm - Customized ACA034M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3034-25-22-10-P is a customized NAAMS power clamp arm based off of ACA034M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3034-25-22-10-P Power Clamp Arm - Customized ACA034M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3034-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA034M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3034-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3034M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358720475341,"sku":"FN-ACA3034-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161332_0_c436546a-461b-41d8-bf27-42a914d70d55.png?v=1704724148"},{"product_id":"naams-power-clamp-arm-aca3035-25-22-10-p","title":"NAAMS ACA3035-25-22-10-P Power Clamp Arm - Customized ACA035M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3035-25-22-10-P is a customized NAAMS power clamp arm based off of ACA035M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3035-25-22-10-P Power Clamp Arm - Customized ACA035M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3035-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA035M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3035-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3035M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358720737485,"sku":"FN-ACA3035-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161333_0_3e743264-87b1-4574-b3a7-c252da1e1314.png?v=1704724153"},{"product_id":"naams-power-clamp-arm-aca3036-25-22-10-p","title":"NAAMS ACA3036-25-22-10-P Power Clamp Arm - Customized ACA036M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3036-25-22-10-P is a customized NAAMS power clamp arm based off of ACA036M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3036-25-22-10-P Power Clamp Arm - Customized ACA036M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3036-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA036M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3036-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3036M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358722244813,"sku":"FN-ACA3036-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161334_0_dcdee892-b7f5-4b86-af3e-363cf21abacc.png?v=1704724159"},{"product_id":"naams-power-clamp-arm-aca3043-25-22-10-p","title":"NAAMS ACA3043-25-22-10-P Power Clamp Arm - Customized ACA043M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3043-25-22-10-P is a customized NAAMS power clamp arm based off of ACA043M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3043-25-22-10-P Power Clamp Arm - Customized ACA043M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3043-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA043M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3043-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3043M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358722572493,"sku":"FN-ACA3043-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161341_0_e2a5296a-ab2b-4f23-91c6-91869bc3f533.png?v=1704724165"},{"product_id":"naams-power-clamp-arm-aca3044-25-22-10-p","title":"NAAMS ACA3044-25-22-10-P Power Clamp Arm - Customized ACA044M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3044-25-22-10-P is a customized NAAMS power clamp arm based off of ACA044M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3044-25-22-10-P Power Clamp Arm - Customized ACA044M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3044-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA044M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3044-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3044M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358723621069,"sku":"FN-ACA3044-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161342_0_8923412c-1d2c-4779-8a0a-05e7ede1c1a3.png?v=1704724171"},{"product_id":"naams-power-clamp-arm-aca3045-25-22-10-p","title":"NAAMS ACA3045-25-22-10-P Power Clamp Arm - Customized ACA045M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3045-25-22-10-P is a customized NAAMS power clamp arm based off of ACA045M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3045-25-22-10-P Power Clamp Arm - Customized ACA045M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3045-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA045M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3045-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3045M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358723883213,"sku":"FN-ACA3045-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161343_0_619f34db-9bf7-4166-b759-dd12e6b94ac0.png?v=1704724177"},{"product_id":"naams-power-clamp-arm-aca3046-25-22-10-p","title":"NAAMS ACA3046-25-22-10-P Power Clamp Arm - Customized ACA046M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3046-25-22-10-P is a customized NAAMS power clamp arm based off of ACA046M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3046-25-22-10-P Power Clamp Arm - Customized ACA046M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3046-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA046M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3046-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3046M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358724243661,"sku":"FN-ACA3046-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161344_0_632e05d1-1983-410d-8fd8-66b3f8bdafb1.png?v=1704724183"},{"product_id":"naams-power-clamp-arm-aca3047-25-22-10-p","title":"NAAMS ACA3047-25-22-10-P Power Clamp Arm - Customized ACA047M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3047-25-22-10-P is a customized NAAMS power clamp arm based off of ACA047M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3047-25-22-10-P Power Clamp Arm - Customized ACA047M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3047-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA047M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3047-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3047M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358725259469,"sku":"FN-ACA3047-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161345_0_0bd7b2d0-a2e0-48a8-a6a6-b9d20cfc13f2.png?v=1704724188"},{"product_id":"naams-power-clamp-arm-aca3048-25-22-10-p","title":"NAAMS ACA3048-25-22-10-P Power Clamp Arm - Customized ACA048M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3048-25-22-10-P is a customized NAAMS power clamp arm based off of ACA048M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 22X22mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3048-25-22-10-P Power Clamp Arm - Customized ACA048M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3048-25-22-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA048M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 22X22mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3048-25-22-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3048M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e63\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e120\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e22X22\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358725521613,"sku":"FN-ACA3048-25-22-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161346_0_ed437e05-8d3b-4e66-88d7-86f3f6da417d.png?v=1704724194"},{"product_id":"naams-power-clamp-arm-aca3110-32-30-10-p","title":"NAAMS ACA3110-32-30-10-P Power Clamp Arm - Customized ACA110M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3110-32-30-10-P is a customized NAAMS power clamp arm based off of ACA110M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3110-32-30-10-P Power Clamp Arm - Customized ACA110M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3110-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA110M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3110-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3110M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e1.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358725882061,"sku":"FN-ACA3110-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161356_0_b44d4bb4-3aab-4333-9647-20e8e346ed2f.png?v=1704724201"},{"product_id":"naams-power-clamp-arm-aca3111-32-30-10-p","title":"NAAMS ACA3111-32-30-10-P Power Clamp Arm - Customized ACA111M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3111-32-30-10-P is a customized NAAMS power clamp arm based off of ACA111M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3111-32-30-10-P Power Clamp Arm - Customized ACA111M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3111-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA111M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3111-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3111M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358726209741,"sku":"FN-ACA3111-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161357_0_a0d18284-1269-4162-9b8e-bb51ab48a97c.png?v=1704724207"},{"product_id":"naams-power-clamp-arm-aca3112-32-30-10-p","title":"NAAMS ACA3112-32-30-10-P Power Clamp Arm - Customized ACA112M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3112-32-30-10-P is a customized NAAMS power clamp arm based off of ACA112M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3112-32-30-10-P Power Clamp Arm - Customized ACA112M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3112-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA112M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3112-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3112M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358726504653,"sku":"FN-ACA3112-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161358_0_8e70e093-43f6-4cb2-a740-fec6841add76.png?v=1704724213"},{"product_id":"naams-power-clamp-arm-aca3113-32-30-10-p","title":"NAAMS ACA3113-32-30-10-P Power Clamp Arm - Customized ACA113M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3113-32-30-10-P is a customized NAAMS power clamp arm based off of ACA113M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3113-32-30-10-P Power Clamp Arm - Customized ACA113M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3113-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA113M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3113-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3113M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.7\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358726996173,"sku":"FN-ACA3113-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161359_0_c11e9c67-7a9f-4fb9-b6bd-654c692274a9.png?v=1704724219"},{"product_id":"naams-power-clamp-arm-aca3114-32-30-10-p","title":"NAAMS ACA3114-32-30-10-P Power Clamp Arm - Customized ACA114M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3114-32-30-10-P is a customized NAAMS power clamp arm based off of ACA114M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3114-32-30-10-P Power Clamp Arm - Customized ACA114M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3114-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA114M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3114-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3114M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358727291085,"sku":"FN-ACA3114-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161360_0_6368ef2a-4454-4bbe-94cd-fece29bbf931.png?v=1704724225"},{"product_id":"naams-power-clamp-arm-aca3115-32-30-10-p","title":"NAAMS ACA3115-32-30-10-P Power Clamp Arm - Customized ACA115M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3115-32-30-10-P is a customized NAAMS power clamp arm based off of ACA115M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3115-32-30-10-P Power Clamp Arm - Customized ACA115M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3115-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA115M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3115-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3115M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358727717069,"sku":"FN-ACA3115-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161361_0_f5c53f77-e5a1-41df-a2c8-caaf6948da45.png?v=1704724232"},{"product_id":"naams-power-clamp-arm-aca3116-32-30-10-p","title":"NAAMS ACA3116-32-30-10-P Power Clamp Arm - Customized ACA116M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3116-32-30-10-P is a customized NAAMS power clamp arm based off of ACA116M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3116-32-30-10-P Power Clamp Arm - Customized ACA116M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3116-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA116M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3116-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3116M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358728110285,"sku":"FN-ACA3116-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161362_0_834c3895-dcdd-4c04-9f35-4dc1d7f04301.png?v=1704724239"},{"product_id":"naams-power-clamp-arm-aca3117-32-30-10-p","title":"NAAMS ACA3117-32-30-10-P Power Clamp Arm - Customized ACA117M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3117-32-30-10-P is a customized NAAMS power clamp arm based off of ACA117M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3117-32-30-10-P Power Clamp Arm - Customized ACA117M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3117-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA117M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3117-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3117M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358728405197,"sku":"FN-ACA3117-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161363_0_9deb2f03-ad63-4651-8634-40977dab1719.png?v=1704724245"},{"product_id":"naams-power-clamp-arm-aca3118-32-30-10-p","title":"NAAMS ACA3118-32-30-10-P Power Clamp Arm - Customized ACA118M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3118-32-30-10-P is a customized NAAMS power clamp arm based off of ACA118M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3118-32-30-10-P Power Clamp Arm - Customized ACA118M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3118-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA118M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3118-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3118M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e4.1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e0\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358728667341,"sku":"FN-ACA3118-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161364_0_d60c2c55-0eac-4271-b052-cec80f3c89e5.png?v=1704724250"},{"product_id":"naams-power-clamp-arm-aca3132-32-30-10-p","title":"NAAMS ACA3132-32-30-10-P Power Clamp Arm - Customized ACA132M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3132-32-30-10-P is a customized NAAMS power clamp arm based off of ACA132M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3132-32-30-10-P Power Clamp Arm - Customized ACA132M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3132-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA132M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3132-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3132M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358729027789,"sku":"FN-ACA3132-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161376_0_ea31952b-fe40-4599-b3ba-03d5fbae794a.png?v=1704724256"},{"product_id":"naams-power-clamp-arm-aca3133-32-30-10-p","title":"NAAMS ACA3133-32-30-10-P Power Clamp Arm - Customized ACA133M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3133-32-30-10-P is a customized NAAMS power clamp arm based off of ACA133M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3133-32-30-10-P Power Clamp Arm - Customized ACA133M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3133-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA133M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3133-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3133M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.7\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358729322701,"sku":"FN-ACA3133-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161377_0_38276836-24fe-4504-b970-30dec041fabf.png?v=1704724263"},{"product_id":"naams-power-clamp-arm-aca3134-32-30-10-p","title":"NAAMS ACA3134-32-30-10-P Power Clamp Arm - Customized ACA134M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3134-32-30-10-P is a customized NAAMS power clamp arm based off of ACA134M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3134-32-30-10-P Power Clamp Arm - Customized ACA134M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3134-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA134M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3134-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3134M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358729715917,"sku":"FN-ACA3134-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161378_0_50469591-cf5d-4f40-9dff-db3d4cae22d0.png?v=1704724270"},{"product_id":"naams-power-clamp-arm-aca3135-32-30-10-p","title":"NAAMS ACA3135-32-30-10-P Power Clamp Arm - Customized ACA135M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3135-32-30-10-P is a customized NAAMS power clamp arm based off of ACA135M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3135-32-30-10-P Power Clamp Arm - Customized ACA135M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3135-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA135M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3135-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3135M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358730076365,"sku":"FN-ACA3135-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161379_0_b3eeb2b0-9c25-41bb-b76d-66f9b8a3ad2f.png?v=1704724277"},{"product_id":"naams-power-clamp-arm-aca3136-32-30-10-p","title":"NAAMS ACA3136-32-30-10-P Power Clamp Arm - Customized ACA136M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3136-32-30-10-P is a customized NAAMS power clamp arm based off of ACA136M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3136-32-30-10-P Power Clamp Arm - Customized ACA136M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3136-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA136M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3136-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3136M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358730469581,"sku":"FN-ACA3136-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161380_0_46221456-576b-4209-8eec-f809c52d18ac.png?v=1704724284"},{"product_id":"naams-power-clamp-arm-aca3137-32-30-10-p","title":"NAAMS ACA3137-32-30-10-P Power Clamp Arm - Customized ACA137M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3137-32-30-10-P is a customized NAAMS power clamp arm based off of ACA137M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3137-32-30-10-P Power Clamp Arm - Customized ACA137M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3137-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA137M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3137-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3137M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358730797261,"sku":"FN-ACA3137-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161381_0_59a1f918-ba15-4d95-a011-4bd0a55ca873.png?v=1704724291"},{"product_id":"naams-power-clamp-arm-aca3138-32-30-10-p","title":"NAAMS ACA3138-32-30-10-P Power Clamp Arm - Customized ACA138M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3138-32-30-10-P is a customized NAAMS power clamp arm based off of ACA138M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3138-32-30-10-P Power Clamp Arm - Customized ACA138M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3138-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA138M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3138-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3138M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e25\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358731485389,"sku":"FN-ACA3138-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161382_0_6beb45fb-cf20-4082-b11f-336687195e8a.png?v=1704724298"},{"product_id":"naams-power-clamp-arm-aca3150-32-30-10-p","title":"NAAMS ACA3150-32-30-10-P Power Clamp Arm - Customized ACA150M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3150-32-30-10-P is a customized NAAMS power clamp arm based off of ACA150M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3150-32-30-10-P Power Clamp Arm - Customized ACA150M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3150-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA150M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3150-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3150M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358731878605,"sku":"FN-ACA3150-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161392_0_3bef0709-ee32-46c8-8758-49701c8352bf.png?v=1704724306"},{"product_id":"naams-power-clamp-arm-aca3151-32-30-10-p","title":"NAAMS ACA3151-32-30-10-P Power Clamp Arm - Customized ACA151M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3151-32-30-10-P is a customized NAAMS power clamp arm based off of ACA151M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3151-32-30-10-P Power Clamp Arm - Customized ACA151M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3151-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA151M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3151-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3151M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.6\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358732239053,"sku":"FN-ACA3151-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161393_0_4e36b796-6d04-4972-95a1-9d6c3b9808b9.png?v=1704724313"},{"product_id":"naams-power-clamp-arm-aca3152-32-30-10-p","title":"NAAMS ACA3152-32-30-10-P Power Clamp Arm - Customized ACA152M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3152-32-30-10-P is a customized NAAMS power clamp arm based off of ACA152M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3152-32-30-10-P Power Clamp Arm - Customized ACA152M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3152-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA152M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3152-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3152M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e2.8\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358733418701,"sku":"FN-ACA3152-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161394_0_732d308f-df57-4847-afb3-e368f6ec08d9.png?v=1704724320"},{"product_id":"naams-power-clamp-arm-aca3155-32-30-10-p","title":"NAAMS ACA3155-32-30-10-P Power Clamp Arm - Customized ACA155M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3155-32-30-10-P is a customized NAAMS power clamp arm based off of ACA155M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3155-32-30-10-P Power Clamp Arm - Customized ACA155M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3155-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA155M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3155-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3155M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.5\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358734663885,"sku":"FN-ACA3155-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161397_0_d61f5d04-bd31-455e-8598-684f5335fe8b.png?v=1704724328"},{"product_id":"naams-power-clamp-arm-aca3156-32-30-10-p","title":"NAAMS ACA3156-32-30-10-P Power Clamp Arm - Customized ACA156M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3156-32-30-10-P is a customized NAAMS power clamp arm based off of ACA156M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3156-32-30-10-P Power Clamp Arm - Customized ACA156M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3156-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA156M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3156-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3156M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.7\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358735286477,"sku":"FN-ACA3156-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161398_0_727c2791-f265-4c45-a02b-5f6d0764d2cf.png?v=1704724335"},{"product_id":"naams-power-clamp-arm-aca3157-32-30-10-p","title":"NAAMS ACA3157-32-30-10-P Power Clamp Arm - Customized ACA157M with 10mm Dowel Holes","description":"\u003ch4\u003eShort Description\u003c\/h4\u003eACA3157-32-30-10-P is a customized NAAMS power clamp arm based off of ACA157M. It is built to the NAAM standards with the exception of oversized dowel holes. The standard 8mm dowel holes have been replaced by 10mm holes and the 30X30mm square hole is cut with wire EDM. Comes powder coated orange.\u003chr\u003e\u003ch3\u003eFull Description\u003c\/h3\u003e\u003ch2\u003eNAAMS ACA3157-32-30-10-P Power Clamp Arm - Customized ACA157M with 10mm Dowel Holes\u003c\/h2\u003eIntroducing ACA3157-32-30-10-P, a tailor-made NAAMS power clamp arm derived from the proven ACA157M model. Crafted to meet NAAM standards, this specialized version features an enhancement - oversized dowel holes. The standard 8mm dowel holes have been upgraded to 10mm for increased strength, and the 30X30mm square hole is precision-cut with wire EDM technology, ensuring top-notch performance and reliability. Elevate your operations with this customized solution designed to exceed expectations. Arms come pre-painted with orange powder coat.\u003cp\u003e\u003c\/p\u003e\u003ctable\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDestaco Item Number\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3157-32-30-10-P\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eNAAMS Tool I.D. \u003cbr\u003e\u003ci\u003e(Alternative Part Number)\u003c\/i\u003e\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eACA3157M\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWeight (kg)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e3.9\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eWidth (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e32\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eDowel Size (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eScrew Size\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003eM10\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eClamp Bore (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e80\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eOffset (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003eSquare hole (mm)\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003e30X30\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n        \u003ctd\u003e\u003cb\u003ePaint\u003c\/b\u003e\u003c\/td\u003e\n        \u003ctd\u003ePowder Coat Orange\u003c\/td\u003e\n    \u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Freer-NAAMS","offers":[{"title":"Default Title","offer_id":47358735777997,"sku":"FN-ACA3157-32-30-10-P","price":68.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0585\/4419\/3741\/products\/0161399_0_d22da9e4-b79e-4a68-92c1-bdcc447e6c2f.png?v=1704724342"}],"url":"https:\/\/www.freertool.com\/collections\/naams-clamp-arms-custom-10mm-dowel-holes.oembed","provider":"Freer Tool and Supply","version":"1.0","type":"link"}