Castable bushings are designed for cast-in-place or plotted installation. Carr Lane manufacturers a variety of castable bushings including, diamond groove bushings, serrata-groove bushings, Diamond-Knurl Un-A-Lok®, and EZ-cast liner bushings. Carr Lane castable bushings provide excellent holding strength against rotational forces. Perfect for cast-in-place or potted installation, Carr Lane castable bushings come in a variety of sizes and are made in stress-proof steel. Browse our selection of American made castable bushings below.
This bushing can be cast in place or potted, just like a Diamond-Groove Bushing, or can be pressed into an installation hole. The straight knurl provides excellent resistance to rotation, but provides less resistance to axial forces than a diamond knurl. Since the bushing's OD is not ground, the ID must be accurately located during casting or potting to ensure accuracy in the finished tool.
Knurled metric liner for cast-in-place or potted installation, incorporating a special locking tab that eliminates the need for a Lockscrew. ULDM Un-A-Lok® Liners are permanent bushings used to hold SFM renewable drill bushings (on the "slip" side only, not the "fixed" side). Diamond-knurled OD provides excellent holding strength against both rotational and axial forces. Since the bushing's OD is not ground, the ID must be accurately located during casting or potting to ensure accuracy in the finished tool.