Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Carr Lock Receiver Bushings

    Carr Lock® Receiver Bushings

    Jig & Fixture Bases

    The Carr Lock® System requires that each Carr Lock® Clamp is used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in the USA.

    Carr Lock® Face-Mount Receiver Bushings

    The Carr Lock® System requires that each Carr Lock® Clamp is used together with a Carr Lock® Receiver Bushing – either the face-mount type shown here or the back-mount type. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Face-Mount Receiver Bushings can be bolted into a slip-fit bored hole from above the subplate, with three socket-head cap screws. Made in the USA.

    Face-Mount Receiver Bushings are available for all Carr Lock® Clamp shank diameters:
    13mm
    16mm
    20mm
    25mm
    30mm
    35mm
    50mm

    Carr Lock® Back-Mount Receiver Bushings

    The Carr Lock® System requires that each Carr Lock® Clamp be used together with a Carr Lock® Receiver Bushing – either the back-mount type shown here or the face-mount type. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Back-Mount Receiver Bushings are installed in the subplate from below, with a slight press fit. Made in the USA.

    Back-Mount Receiver Bushings are available for all Carr Lock® Clamp shank diameters:
    13mm
    16mm
    20mm
    25mm
    30mm
    35mm
    50mm

    Application Information

    Each mounting point consists of three components:
    (1) Carr Lock® Clamp, with a precisely ground shank
    (2) Carr Lock® Liner Bushing or clearance hole in the top plate
    (3) Carr Lock® Receiver Bushing in the subplate

    Installation

    Back-Mount Receiver Bushings are more compact than Face-Mount Receiver Bushings, but take more effort to install. Back-mount bushings are installed in the subplate from below, with a slight press fit (measure actual bushing before boring hole to provide .0005 maximum press fit, to avoid ID distortion). The installation hole must be jig bored for accurate size and location. Installed bushings will be approximately .012" below the subplate's top surface.

    Material

    4340 steel, heat treated Rc 50-54, black oxide finish. DFARS and RoHS compliant.

    View as Grid List
    Sort by
    Display per page

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-13-CLBR

    SKU: CL-13-CLBR
    MPN: CL-13-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-16-CLBR

    SKU: CL-16-CLBR
    MPN: CL-16-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-20-CLBR

    SKU: CL-20-CLBR
    MPN: CL-20-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-25-CLBR

    SKU: CL-25-CLBR
    MPN: CL-25-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-30-CLBR

    SKU: CL-30-CLBR
    MPN: CL-30-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-35-CLBR

    SKU: CL-35-CLBR
    MPN: CL-35-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-50-CLBR

    SKU: CL-50-CLBR
    MPN: CL-50-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-CLM-13-CLBR

    SKU: CL-CLM-13-CLBR
    MPN: CLM-13-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    CARR LOCK BACK-MOUNT RECEIVER BUSHING CL-CLM-16-CLBR

    SKU: CL-CLM-16-CLBR
    MPN: CLM-16-CLBR
    Email Sales for Pricing
    The Carr Lock® System requires that each Carr Lock® Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.

    Carr Lock Receiver Bushings