7250 psi max
Single Acting
Pull-clamp version of our popular Block Cylinders. A plunger is extended with the pressure off, then retracts when pressure is applied. Compact design with many applications. Easy to mount on flat surfaces, horizontally or vertically. Excellent for pressing and assembly operations, with very high forces available.
Available in five inch sizes and eight metric sizes. Push force at 7250 psi:
1350 Lbs
3210 Lbs
5440 Lbs
8520 Lbs
12900 Lbs
20700 Lbs
34100 Lbs
52800 Lbs
Applying fluid pressure retracts the plunger. Spring return to extended position.
Several possible mounting methods: 1) insert four socket-head cap screws from the plunger end, through the four counterbored holes parallel to the plunger; 2) insert four socket-head cap screws from the bottom end, through the four counterbored holes parallel to the plunger; 3) insert two socket-head cap screws through the two broad-side holes perpendicular to the plunger (drilled by the user in the locations shown on the Dimensions page). Method 3 requires that the Block Cylinder be backed up for pressures over 2300 psi by a rectangular strip or dowel pins with a height at least 1/3 of the B dimension.
1/4" BSPP port. Do not use NPT fittings.
For high-temperature applications (212° to 300° F), we offer Viton seals in all sizes. Viton seals have a slightly shorter service life. Please contact the factory for more information.
Plunger > Steel, case hardened. Body > Steel, black oxide finish.
![]() |