Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Weldon

    3/8" Dia. - 3-1/8" OAL - M42 - Non-Center Cut SE EM - 4 FL

    $47.01
    3/8" Dia. - 3-1/8" OAL - M42 - Non-Center Cut SE EM - 4 FL
    *Product images may differ from actual purchased item.*
    SKU: FTS-CR90KPA122A
    Manufacturer part number: 66304-00-W


    • FTS-CR90KPA122A
    • M-42 8% Cobalt Multi-Flute Single End
    • Non-Center Cutting
    • Crest-Kut? End Mills Increase metal removal rates rough and finish in one operation
    • Rough and finish in one operation
    • Produce flake-like chips that ride coolant surface film and wash easily out of cuts
    • Longer tool life
    • Increased feed rates for greater output
    • Improved heat dissipation
    • Chatter, vibration and undesirable noise are eliminated
    • Tool damage caused by harmonics is eliminated
    • Easily resharpened in-plant
    • Relief and clearance angles can be changed quickly and easily to accommodate a broad range of work materials
    • WELDON Shank with two screw drive on 7/8 shanks and larger
    • Cutting diameter tolerance + .003, .003


    Technical Specifications:
    •  Coating: Uncoated
    •  Flute Length: 1-3/8
    •  Overall Length: 3-1/8
    •  Style: Standard
    •  Material: M-42 Cobalt
    •  Size: 3/8
    •  Shank Diameter: 3/8
    •  Number of Flutes: 4


    *Product images may differ from actual purchased item.*
    Write your own review
    • Only registered users can write reviews
    • Bad
    • Excellent
    • FTS-CR90KPA122A
    • M-42 8% Cobalt Multi-Flute Single End
    • Non-Center Cutting
    • Crest-Kut? End Mills Increase metal removal rates rough and finish in one operation
    • Rough and finish in one operation
    • Produce flake-like chips that ride coolant surface film and wash easily out of cuts
    • Longer tool life
    • Increased feed rates for greater output
    • Improved heat dissipation
    • Chatter, vibration and undesirable noise are eliminated
    • Tool damage caused by harmonics is eliminated
    • Easily resharpened in-plant
    • Relief and clearance angles can be changed quickly and easily to accommodate a broad range of work materials
    • WELDON Shank with two screw drive on 7/8 shanks and larger
    • Cutting diameter tolerance + .003, .003


    Technical Specifications:
    •  Coating: Uncoated
    •  Flute Length: 1-3/8
    •  Overall Length: 3-1/8
    •  Style: Standard
    •  Material: M-42 Cobalt
    •  Size: 3/8
    •  Shank Diameter: 3/8
    •  Number of Flutes: 4


    *Product images may differ from actual purchased item.*