Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search

    Air-Feed-Drill Bushings (24000 Series)

    Air-Feed-Drill Bushings (24000 Series)

    Drill-Jig Bushings

    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. Adaptor-Tip Assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    The 24000-series bushings shown here have 1-1/2"-12 mounting threads. This series is available in seven OD sizes to fit drill diameters from .3125" to .9375". Preferred sizes can be mounted by any method, including the use of Lock Liners, while other sizes have limited mounting options.
    5/8" OD
    3/4" OD
    7/8" OD
    1" OD
    1-1/8" OD (Preferred size)
    1-1/4" OD
    1-1/2" OD (Preferred size)

    To order a specific standard bushing, select the basic part number below and add the desired ID drill size (as a 4-place decimal inch) on the Price & Availability screen. See Technical Information tab for Standard Drill Sizes. Standard prices apply only to bushings with a standard inch, number, letter, or metric ID size within the stated range.

    Example standard bushings:
    A-24606-.5000 Adaptor-Tip Assembly, 1/2" ID
    24606-.5000 Shank only, 1/2" ID
    24000 Collar only

    Air-Feed-Drill Bushings – Coolant Type (24000 Series)

    For coolant-inducing air-feed drills, we offer these special shanks, collars, and reducers with internal coolant passages. The coolant-type 24000-series bushings shown here (numbered as 14000 series for coolant type) have 1-1/2"-12 mounting threads. This series is available in seven OD sizes to fit drill diameters from .3125" to .9375". Preferred sizes can be mounted by any method, including the use of Lock Liners, while other sizes have limited mounting options.
    5/8" OD
    3/4" OD
    7/8" OD
    1" OD
    1-1/8" OD (Preferred size)
    1-1/4" OD
    1-1/2" OD (Preferred size)

    All coolant-type bushings are manufactured to order. To order a specific bushing, select the basic part number below and add the desired ID drill size (as a 4-place decimal inch). See Technical Information tab for Standard Drill Sizes.

    Example part numbers:
    A-14606-.5000 Adaptor-tip assembly,coolant type, 1/2" ID
    14606-.5000 Shank only, coolant type 1/2" ID
    14000 Collar only, coolant type

    Material

    1144 Stressproof steel, heat treated to achieve Rc 62-64 ID hardness. Other materials are available by special order. DFARS and RoHS compliant.

    View as Grid List
    Sort by
    Display per page

    AIR FEED BUSHING COLLAR CL-24000

    SKU: CL-24000
    MPN: 24000
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    AIR FEED LINER BUSHING CL-19947

    SKU: CL-19947
    MPN: 19947
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    AIR FEED LINER BUSHING CL-19949

    SKU: CL-19949
    MPN: 19949
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    AIR FEED LINER BUSHING CL-19950

    SKU: CL-19950
    MPN: 19950
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    AIR FEED LINER BUSHING CL-19951

    SKU: CL-19951
    MPN: 19951
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    AIR FEED LINER BUSHING CL-19952

    SKU: CL-19952
    MPN: 19952
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    LOCK LINER CL-A-16525

    SKU: CL-A-16525
    MPN: A-16525
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    LOCK LINER CL-A-16526

    SKU: CL-A-16526
    MPN: A-16526
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    TAPER-LOK LINER CL-TLL-16525

    SKU: CL-TLL-16525
    MPN: TLL-16525
    Email Sales for Pricing
    These bushing assemblies are designed for use with air-feed drills, tappers, and back-spotfacers. They fit all standard drill motors, including Gardner-Denver, Keller, Aro, Buckeye, Quackenbush, Desoutter, and Ingersoll-Rand. Adaptor-tip assemblies consist of two pieces: a locking collar and a pressed-in shank. The collar screws into the air-feed drill's nosepiece, precisely aligns the shank, and locks the drill in place when rotated 30° counterclockwise after insertion in the liner. Shanks and collars can be ordered separately.

    Air-Feed-Drill Bushings (24000 Series)