Brand: HALDER
Floating Clamp - 23320.0016
SKU: EH-23320.0016
MPN:
*Product images may differ from actual purchased item.*
**Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.**
*Please note, there is a $50 minimum for all Halder product orders*
Short Description
Floating Clamps combined clamping and locking M 16 23320.0016.EH 23320
The floating clamp is used to clamp and support additional clamping points on components.
The benefits of the floating clamp are:
especially suitable for large workpieces
avoids vibration during the processing
clamps ribs, beads and shackles to reinforce clamped components
distortion-free clamping of raw parts
Halder 23320.0016 Data Sheet
*Please contact Sales@freertool.com for all lead times before placing your order. Once paid for, any cancellations will have a 4% cancellation fee.*
Full Description
The floating clamp is used to clamp and support additional clamping points on components.
The benefits of the floating clamp are:
- especially suitable for large workpieces
- avoids vibration during the processing
- clamps ribs, beads and shackles to reinforce clamped components
- distortion-free clamping of raw parts
Material
Adjustable body
- Aluminium, red anodised
Body
- Case hardened steel, nitrided, manganese phosphate treated and ground
Clamping Jaws
- Case hardened steel, nitrided, manganese phosphate treated
Assembly
- Mount the floating clamp (M 16 connection thread) onto the device with a wrench (WS 55).
- Adjust the height limit stop and the rotating area with the red sleeve and clamp with a set screw (3 x WS 3). When setting the height limit, consider tolerance of workpiece.
Operation
- Push the floating clamp downwards.
- Pivot the clamping jaws in as far as possible.The floating clamp contacts the bottom of the workpiece with a low spring load.
- Tighten the floating clamp with a hexagonal nut (WS24) having a min. torque of 50Nm and a maximum torque of 115Nm. In the clamping process, the workpiece is clamped and simultaneously supported.
- Releasing is done in reverse order.
Accessories
For custom clamping situation, the standard upper clamping jaw supplied can be replaced by the exchange clamping jaws (23320.0062 / .0064 / .0066).
We Also Recommend
Adapter for Taper Clamping Unit - 23250.0530
SKU: EH-23250.0530
MPN: 23250.053
Adapter for Taper Clamping Unit - 23250.0531
SKU: EH-23250.0531
MPN: 23250.0531
Adjustable Clamping Lever - 24400.0022
SKU: EH-24400.0022
MPN: 24400.0022
Adjustable Clamping Lever - 24420.1010
SKU: EH-24420.1010
MPN: 24420.101
Adjustable Clamping Lever - 24420.1012
SKU: EH-24420.1012
MPN: 24420.1012