9500 - Pneumatic Swing Clamp

DE-STA-CO's newest generation swing clamp with patented swing technology. Unique design allows clamp arm to swing 90� on a horizontal plane before moving downward on it's clamping stroke. See product catalog for clamp arm options.

• No linear travel during rotation.
• Switch grooves for either Ø4mm or 6X5mm switches. Piston magnet standard.
• Double supported piston rod
• Available in 30mm and 40mm bore sizes. Arm sold separately.

9500 Arm Options - Pneumatic Swing Clamp Arm Options

These aluminum clamp arms are designed for the 9500 Series Swing Clamps.

• Arm Length is measured from center of piston rod to clamping point.
• Arms are positioned in 90° increments to the piston rod.
• Available in single or T-style (Arm Length is doubled)
• Refer to Data sheet for information on custom arm fabrication.

035-1 - SELECT Pneumatic Swing/Pull Clamps

SELECT line of pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. The fast acting clamps can generate up to 50 pounds of clamping force from shop air.

• Swing motion available in 0, 45, 60, and 90 degrees
• Four styles of arms
• Double-locked arm design is bolted to piston shaft and around shaft diameter for extra rigidity
• Double-acting design

035-2 - SELECT Pneumatic Swing/Pull Clamps

SELECT line of pneumatic swing/pull clamps are designed for applications not requiring hydraulic power. The fast acting clamps can generate up to 50 pounds of clamping force from shop air.

• Swing motion available in 0, 45, 60, and 90 degrees
• Four styles of arms
• Double-locked arm design is bolted to piston shaft and around shaft diameter for extra rigidity
• Double-acting design

800/1200 - Pneumatic Retractor Clamp

Low profile pneumatic retractor clamp. Arm moves straight forward and then pivots down to clamp workpiece.

• 550 - 1600 lb. Exerting force capability
• Single-acting pneumatic system required to operate
• Compact size and low profile
• Extended arm option available

8000 - Pneumatic Swing Clamp

Smallest in our series of pneumatic swing cylinders. Useful in secondary manufacturing operations. Supplied with magnetic ring for position sensing.

801 - Pneumatic Retractor Clamp

Low profile pneumatic retractor clamp. Arm moves straight forward and then pivots down to clamp workpiece.

• 38 - 238 lb. Exerting force capability
• Double-acting pneumatic system required to operate
• Compact size and low profile
• Extended arm option available

802 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 202. Has built in flow restrictors

• 200 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

8021 - Pneumatic Hold Down Clamp - Enclosed

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 390 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

803 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 603. Has built in flow restrictors

• 600 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

8031 - Pneumatic Straight Line Clamp - Enclosed

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 2000 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

807 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 207. Has built in flow restrictors

• 375 - 500 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications. Solid bar and U-Bars available

8071 - Pneumatic Hold Down Clamp - Enclosed

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 450 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

810 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 210. Has built in flow restrictors

• 600 - 750 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications. Solid bar and U-Bars available

8100 - Pneumatic Swing Clamp

Smallest in our series of pneumatic swing cylinders. Useful in secondary manufacturing operations. Supplied with magnetic ring for position sensing.

8101 - Pneumatic Hold Down Clamp - Enclosed

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 700 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

812 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 201. Has built in flow restrictors

• 150 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

816 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 601. Has built in flow restrictors

• 200 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

817 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 317. Has built in flow restrictors

• 350 - 450 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications. Solid bar and U-Bars available

8200 - Pneumatic Swing Clamp

Largest in our series of pneumatic swing cylinders. Useful in secondary manufacturing operations. Supplied with magnetic ring for position sensing.

827 - Pneumatic Hold Down Clamp

Larger version of model 817

• 350 - 450 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications. Solid bar and U-Bars available

830 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 630.

• 2500 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

8300 - Pneumatic Swing Clamp

Largest in our series of block mounted pneumatic swing cylinders. Useful in secondary manufacturing operations. Supplied with magnetic ring for position sensing.

840 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications. Oval cylinder provides narrow profile to fit into tight spaces

• 1500 lb. Capacity
• 180 degree clamping arm position
• Available with magnetic ring for position sensing as an option. Switches are also available
• Machined pre-stop controls to over-center locked position.

8400 - Pneumatic Swing Clamp

Mid range size in our series of threaded body pneumatic swing cylinders. Useful in secondary manufacturing operations. Supplied with magnetic ring for position sensing.

841 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications. Oval cylinder provides narrow profile to fit into tight spaces

846 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 516.

• 750 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

847 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 247.

• 1000 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications. Solid bar and U-Bars available

850 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 650.

• 16,000 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

858 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 558.

• 4000 lb. capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

860 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications.

• 3000 lb. Capacity
• 180 degree clamping arm position
• Available with magnetic ring for position sensing as an option. Switches are also available
• Machined pre-stop controls to over-center locked position.

861 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications.

• 3000 lb. Capacity
• 90 degree clamping arm position
• Available with magnetic ring for position sensing as an option. Switches are also available
• Machined pre-stop controls to over-center locked position.

863 - Pneumatic Heavy Duty Action Clamp

Enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 1600 lb. maximum exerting force @ 80 psi.
• 90 degree clamping arm position, but arm can be re-positioned in 45 degree increments
• Available with magnetic ring for position sensing as an option. Switches are also available
• Right hand, left hand, or dual arm options available

864 - Pneumatic Heavy Duty Action Clamp

Enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 1600 lb. maximum exerting force @ 80 psi.
• 180 degree clamping arm position, but arm can be re-positioned in 45 degree increments
• Available with magnetic ring for position sensing as an option. Switches are also available
• Right hand, left hand, or dual arm options available

868 - Pneumatic Hold Down Clamp

Larger version of model 827. Mounts perpendicular to the clamping surface.

• 4000 lb. Capacity
• Double-acting pneumatic system required to operate
• Available with magnetic ring for position sensing as an option. Switches are also available
• Can be equipped with Viton seals for high temperature applications

870 - Pneumatic Heavy Duty Action Clamp

Clamp is able to accommodate inconsistent workpiece thicknesses, up to 0.18".

871 - Pneumatic Heavy Duty Action Clamp

Clamp is able to accommodate inconsistent workpiece thicknesses, up to 0.14".

890 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications.

• 5000 lb. Capacity
• 180 degree clamping arm position
• Available with magnetic ring for position sensing as an option. Switches are also available
• Machined pre-stop controls to over-center locked position.

891 - Pneumatic Heavy Duty Action Clamp

Designed for high production applications.

• 5000 lb. Capacity
• 90 degree clamping arm position
• Available with magnetic ring for position sensing as an option. Switches are also available
• Machined pre-stop controls to over-center locked position.

893 - Pneumatic Heavy Duty Action Clamp

Enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 1600 lb. maximum exerting force @ 80 psi.
• 90 degree clamping arm position, but arm can be re-positioned in 45 degree increments
• Available with magnetic ring for position sensing as an option. Switches are also available
• Right hand, left hand, or dual arm options available

894 - Pneumatic Heavy Duty Action Clamp

Enclosed linkage makes clamp ideal for dirty environments such as welding and machining.

• 1600 lb. maximum exerting force @ 80 psi.
• 180 degree clamping arm position, but arm can be re-positioned in 45 degree increments
• Available with magnetic ring for position sensing as an option. Switches are also available
• Right hand, left hand, or dual arm options available

89R - Pneumatic Swing Clamp

The compact design and high reliability of the DE-STA-CO pneumatic swing clamping elements makes them suitable for applications where rapid and unobstructed access to the clamping station is required

• Built-in model and mounted model
• left-hand, right-hand, linear stroke
• Double-acting cylinder
• Lifetime of several million cycles

K-1000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (10 kN). Piston rod with male thread.

• Power stroke 7 mm (0.276 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

K-3000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (30 kN). Piston rod with male thread.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

K-400 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (4 kN). Piston rod with male thread.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

K-4500 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (45 kN). Piston rod with male thread.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

WK-1000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (10 kN). Piston rod with ISO fit.

• Power stroke 7 mm (0.276 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

WK-3000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (30 kN). Piston rod with ISO fit.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

WK-400 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (4 kN). Piston rod with ISO fit.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

WK-4500 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (45 kN). Piston rod with ISO fit.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 200 mm (0.591 to 7.874 inch)
• Also with magnetic field sensing (-A)
• Customised models on request

WK-6000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (60 kN). Piston rod with ISO fit.

• Power stroke 6 mm (0.236 in) (other power strokes on request)
• Forward strokes from 15 up to 120 mm (0.591 to 4.724 inch)
• Customised models on request

WR-2000 - Pneumatic Power Cylinder

Power element of machines, tool and devices. Mechanical advantage 10:1, due to the wedge lever principle. The unit has a two steps stroke consisting of the forward stroke and the power stroke with the amplified force (20 kN).

• Power stroke 7 mm (0.276 in)
• Forward strokes from 15 up to 120 mm (0.591 to 4.724 inch)
• Rectangular design
• Two piston rods prevent twisting